Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3-1333 ECC Registered DIMM memory upgrade
An 8 GB DDR3-1333 ECC registered DIMM kit for Dell PowerEdge R710 servers
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- ECC protection prevents data errors in critical workloads
- Registered design supports dense 48 GB or 192 GB server configurations
- 1333 MHz DDR3 speed matches Dell PowerEdge R710 specifications
- Dual-rank 2Rx4 organisation maximises memory bandwidth
- 2 × 4 GB kit enables dual-channel installation
Dell PowerEdge R710 ECC Kit
This 8 GB kit contains two 4 GB registered ECC DIMMs built for the Dell PowerEdge R710 server. Each module runs at DDR3-1333 with a CL9 timing and 1.5 V operation. The registered design adds signal buffering for stable multi-module configurations. It targets administrators expanding memory in compatible Dell rack servers.
8 GB Registered Capacity
The paired modules provide 8 GB of ECC protected memory for workloads that demand error correction. Registered signalling supports larger populations than unbuffered alternatives, yet the system caps registered DIMM populations at eighteen sockets across six banks. Quad-rank modules in the second bank drop to 800 MHz, and a third bank is disabled when quad-rank DIMMs are installed.
DDR3-1333 Interface Limits
The DDR3 interface operates at 1333 MHz but automatically clocks down to 1066 MHz or 800 MHz depending on the installed Xeon model and bank population. Mixing registered and unbuffered ECC modules is not supported. Maximum registered ECC capacity reaches 288 GB with dual CPUs, while unbuffered ECC tops out at 192 GB.
Ciri-ciri utama
- ECC protection prevents data errors in critical workloads
- Registered design supports dense 48 GB or 192 GB server configurations
- 1333 MHz DDR3 speed matches Dell PowerEdge R710 specifications
- Dual-rank 2Rx4 organisation maximises memory bandwidth
- 2 × 4 GB kit enables dual-channel installation
Spesifikasi
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5127210600ECCR2R4H |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Dell Poweredge R710 |
| Package Content | 2 Memory RAM Sticks |
Soalan tentang produk ini
Will these DDR3-1333 modules run at full speed in my Dell PowerEdge R710 with older Xeon CPUs installed?
The modules will automatically clock down to 1066 MHz or 800 MHz depending on which Xeon model is fitted and how many banks are populated.
How can I confirm the ECC registered memory is detected correctly after installation?
Enter the system BIOS or use Dell OpenManage to verify all DIMM slots show 4 GB ECC Registered modules running at the expected speed.
Does the kit include any heat spreaders or extra cables for the PowerEdge R710?
The package contains two 4 GB DDR3 ECC Registered DIMMs only; heat spreaders are included only if current inventory requires them.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



