Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green 2.85mm TPU filament spool, 500g, matte finish

E3D Online

E3D Online spoolWorks FleXD TPU Filament 2.85mm 500g Green 3d printers accessory

SKU CH-GN7Y-X1P26

Semi-flexible TPU filament on a 500 g spool, 2.85 mm diameter, prints at 220–240 °C with high abrasion resistance and vibrant green colour

  • ColorGreen
  • TypeFilament
  • Easy printing with 30% standard speed at 15mm/s
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress well
  • Elastic flexibility enables bendable prints like phone cases
  • 85mm diameter on 500g spool fits compatible printers

Filament for flexible prints

E3D spoolWorks FleXD is a semi-flexible TPU filament supplied as a 500 g spool of 2.85 mm green material. It prints at 220-240 °C with a bed temperature of 45-85 °C and a recommended speed of 15 mm/s. The formulation delivers high shear strength and abrasion resistance while remaining elastic with a rich, solid colour.

Upgrade from rigid plastics

This filament replaces standard PLA or ABS when parts need to bend, absorb impact or survive repeated flexing. The jump is worth it for functional items such as phone cases, keyboard protectors, insoles or any design that benefits from rubber-like behaviour. It is not for buyers who need a rigid structural material or a dissolvable support filament.

Check printer compatibility

Verify that your extruder and hot-end can handle flexible TPU at the stated temperatures and the slow 15 mm/s feed rate. A glue stick on the build plate is recommended for bed adhesion. Ensure the filament path is well constrained to prevent buckling during the print.

Ciri-ciri utama

  • Easy printing with 30% standard speed at 15mm/s
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress well
  • Elastic flexibility enables bendable prints like phone cases
  • 85mm diameter on 500g spool fits compatible printers

Spesifikasi

BrandE3D
ModelFleXD
ColorGreen
TypeFilament

Soalan tentang produk ini

What filament diameter and spool weight does this 2.85 mm green FleXD come on?

The spool holds 500 g of 2.85 mm filament, so confirm your extruder and Bowden path accept that diameter before loading.

Which slicer settings do users most often mis-set for this semi-flexible TPU?

Print at 15 mm/s (30 % of normal speed) with the nozzle at 220-240 °C and the bed at 45-85 °C; skipping the low speed causes jams and under-extrusion.

How should the spool be stored to keep the TPU printable over time?

Keep the filament sealed with desiccant when not printing; TPU absorbs moisture quickly and will bubble or lose layer adhesion if left exposed.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.