暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 2.85mm TPU filament spool, 500g, matte finish

E3D Online

E3D Online spoolWorks FleXD TPU Filament 2.85mm 500g Green 3d printers accessory

SKU CH-GN7Y-X1P26

Semi-flexible TPU filament on a 500 g spool, 2.85 mm diameter, prints at 220–240 °C with high abrasion resistance and vibrant green colour

  • ColorGreen
  • TypeFilament
  • Easy printing with 30% standard speed at 15mm/s
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress well
  • Elastic flexibility enables bendable prints like phone cases
  • 85mm diameter on 500g spool fits compatible printers

Filament for flexible prints

E3D spoolWorks FleXD is a semi-flexible TPU filament supplied as a 500 g spool of 2.85 mm green material. It prints at 220-240 °C with a bed temperature of 45-85 °C and a recommended speed of 15 mm/s. The formulation delivers high shear strength and abrasion resistance while remaining elastic with a rich, solid colour.

Upgrade from rigid plastics

This filament replaces standard PLA or ABS when parts need to bend, absorb impact or survive repeated flexing. The jump is worth it for functional items such as phone cases, keyboard protectors, insoles or any design that benefits from rubber-like behaviour. It is not for buyers who need a rigid structural material or a dissolvable support filament.

Check printer compatibility

Verify that your extruder and hot-end can handle flexible TPU at the stated temperatures and the slow 15 mm/s feed rate. A glue stick on the build plate is recommended for bed adhesion. Ensure the filament path is well constrained to prevent buckling during the print.

特長

  • Easy printing with 30% standard speed at 15mm/s
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress well
  • Elastic flexibility enables bendable prints like phone cases
  • 85mm diameter on 500g spool fits compatible printers

仕様

BrandE3D
ModelFleXD
ColorGreen
TypeFilament

この商品に関する質問

What filament diameter and spool weight does this 2.85 mm green FleXD come on?

The spool holds 500 g of 2.85 mm filament, so confirm your extruder and Bowden path accept that diameter before loading.

Which slicer settings do users most often mis-set for this semi-flexible TPU?

Print at 15 mm/s (30 % of normal speed) with the nozzle at 220-240 °C and the bed at 45-85 °C; skipping the low speed causes jams and under-extrusion.

How should the spool be stored to keep the TPU printable over time?

Keep the filament sealed with desiccant when not printing; TPU absorbs moisture quickly and will bubble or lose layer adhesion if left exposed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。