Goldshell
Goldshell Mini-DOGE 185 MH/s without PSU mining hardware
A compact Dogecoin and Litecoin miner delivering 185 MH/s at 233 W with 35 dB noise and Ethernet or Wi-Fi connectivity
- ColorWhite
- 185 MH/s hashrate for DOGE and LTC mining
- 233 W wall power with a tolerance of ±5 %
- 35 dB noise level keeps home use quiet
- Ethernet and Wi-Fi connectivity for flexible setup
- Compact 175 × 150 × 84 mm design weighs 2 kg
Home Dogecoin and Litecoin Miner
The Goldshell Mini-DOGE is a compact ASIC miner built for Scrypt-based coins such as Dogecoin and Litecoin. It delivers a nominal hashrate of 185 MH/s with a tolerance of roughly five percent. The unit draws about 233 W at the wall and operates at a quiet 35 dB, making it suitable for residential spaces.
Step Up From GPU Or Entry ASIC
Moving from a graphics card or a lower-output ASIC to this device brings a dedicated Scrypt engine that runs continuously without driver overhead. The efficiency jump is worth it when electricity cost per kilowatt-hour makes GPU mining unprofitable and a purpose-built 185 MH/s platform can pay back its hardware cost within a realistic horizon.
Desktop Form Factor With Dual Network Options
Measuring 175 mm by 150 mm by 84 mm and weighing 2 kg, the miner sits on a shelf or desk and connects through either Ethernet or Wi-Fi. An external 80 PLUS Gold supply rated above 600 W with 12 V 25 A output is required, freeing the chassis from an internal PSU and simplifying cooling in a home environment.
Ciri-ciri utama
- 185 MH/s hashrate for DOGE and LTC mining
- 233 W wall power with a tolerance of ±5 %
- 35 dB noise level keeps home use quiet
- Ethernet and Wi-Fi connectivity for flexible setup
- Compact 175 × 150 × 84 mm design weighs 2 kg
Spesifikasi
| Brand | Goldshell |
|---|---|
| Model | Mini-DOGE |
| Color | White |
Soalan tentang produk ini
What clearance does the 175 mm by 150 mm by 84 mm Mini-DOGE need for airflow?
Allow at least 50 mm of free space around the 175 mm by 150 mm by 84 mm chassis so the low-noise fans can keep the 35 dB rating and stay within the 0 to 35 °C operating range.
Which step is often missed when connecting the miner via Ethernet or Wi-Fi?
After wiring the Ethernet cable or selecting the Wi-Fi network in the web UI, you must save the pool settings and reboot; the miner will not start hashing at 185 MH/s until the reboot completes.
When should the custom Goldshell PSU be replaced to maintain the 233 W draw?
Plan to swap the power supply after roughly two years of continuous 233 W operation or if the 12 V rail can no longer deliver a steady 25 A under load.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



