greenDracaena
greenDracaena D-SoftG14MM-group G1/4" 3/8" ID 1/2" OD Compression Fitting Silver 2 Pack
Two silver G1/4" compression fittings connect 3/8" ID, 1/2" OD soft tubing with embedded O-ring seals for leak-free liquid cooling loops
- Block MaterialBrass, Copper
- Radiator Size2 pcs
- Radiator MaterialBrass, Copper
- Fan Size2 pcs
- Fan Dim.0.86 in x 0.7 in x 0.86 in
- Fan ConnectorG1/4"
- Premium brass and copper construction ensures lasting corrosion resistance
- G1/4 thread enables quick integration into standard liquid-cooling loops
- Embedded O-ring design provides a secure leakproof seal
- Compatible with 10×13 mm (3/8" ID, 1/2" OD) soft tubing for flexible routing
- Compact 0.86 × 0.7 × 0.86 in size fits tight build spaces
Two-Pack G1/4" Soft-Tube Fittings
This pair of silver compression fittings connects 3/8" ID, 1/2" OD soft tubing to a standard G1/4" thread in a custom water-cooling loop. They are built from brass and copper with a chrome finish for corrosion resistance. The set suits builders assembling a new loop or extending an existing one. Each fitting weighs 1.76 ounces and measures .86 x .7 x .86 inches.
G1/4" Thread and 10×13 mm Hose Limit
The G1/4" UN thread is the only interface these fittings accept, so every block, radiator or pump port must match that pitch. Tubing must be exactly 10 mm inner diameter by 13 mm outer diameter (3/8" ID, 1/2" OD); larger or smaller hose will not seal. No adapter for other thread sizes or hose dimensions is included. The embedded O-ring provides the sole sealing surface, so surface finish on the mating port matters.
Hand-Tight Install With Leak-Test Step
Installation is a simple hand-tighten of the knurled collar onto the tubing and thread; no special tools are required. The most common issue is under-tightening, which leaves a microscopic weep path under pressure. Over-tightening can deform the soft tube and also cause leaks. The manufacturer stresses a full loop pressure test before powering the system to catch any seal failures.
Ciri-ciri utama
- Premium brass and copper construction ensures lasting corrosion resistance
- G1/4 thread enables quick integration into standard liquid-cooling loops
- Embedded O-ring design provides a secure leakproof seal
- Compatible with 10×13 mm (3/8" ID, 1/2" OD) soft tubing for flexible routing
- Compact 0.86 × 0.7 × 0.86 in size fits tight build spaces
Spesifikasi
| Brand | greenDracaena |
|---|---|
| Series | Soft Tube 1/2" OD (Silver) |
| Model | D-SoftG14MM-group |
| Part Number | D-RGKN-B38-Silver-2 |
| Block Material | Brass, Copper |
| Radiator Size | 2 pcs |
| Radiator Material | Brass, Copper |
| Fan Size | 2 pcs |
| Fan Dim. | 0.86 in x 0.7 in x 0.86 in |
| Fan Connector | G1/4" |
| Color | Silver |
| LED Color | Soft Tube 1/2" OD (Silver) |
| Tube Material | Brass, Copper |
| Package Contents | O-rings |
Soalan tentang produk ini
Should I pick the two-pack or look for a larger kit?
The product is sold as a two-piece pack; buy multiple packs if your loop needs more than two connection points.
What does the 0.86-inch dimension mean once the fitting is installed?
Each fitting measures 0.86 in long by 0.86 in wide by 0.7 in thick, so it adds that much length and bulk to every tube run.
The fitting uses a G1/4 thread — what tubing sizes does that actually support?
It accepts soft tubing with 3/8 in inner diameter and 1/2 in outer diameter (10×13 mm), sealing with the included O-rings.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001049BTC
Ada stok