Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black desktop laser engraver with a 3.5 inch touchscreen and open frame design

LONGER

LONGER Ray5 20W Laser Engraver 130W 3.5" Touchscreen

SKU CH-ST8C-FKTGR

A 20 W diode laser engraver with a 3.5" touchscreen, 400 × 365 mm work area and 24 000 mm/min top speed that cuts 15 mm pine or 8 mm acrylic in one pass

  • TypeLaser Engraver
  • TechnologyDioser Technology
  • Output PowerDC24V5A 120W
  • Work Area400x365mm (15.75x14.37inch)
  • Max Working Speed24000mm/min
  • ColorBlack

Option 20W-2

  • 10W
  • 20W-2
  • 5W

Versi yang dicoret wujud, tetapi tidak tersedia di sini.

  • 20W output power cuts 15mm pine and 8mm acrylic in one pass
  • 08×0.1mm ultra-fine laser focus with 256-bit colour scale for finer engraving detail
  • 5" colour touchscreen plus SD card, USB, APP and Wi-Fi connection options
  • Control multiple engravers from one terminal for parallel production workflows
  • 400×365mm work area with 24,000mm/min max speed for efficient desktop engraving

LONGER Ray5 20W Laser Engraver

The LONGER Ray5 20W is a desktop laser engraver designed for makers and small workshops. It offers a 400x365mm work area and uses Dioser Technology with a 20W output power module. The unit includes a 3.5 inch colour touchscreen and supports four connection methods including Wi-Fi and SD card. It is suited for users who need a self-contained engraving and cutting station.

Sustained 7×24 hour engraving capability

The machine is rated for continuous 7×24 hour operation, allowing parallel control of multiple units from a single terminal. A 32-bit motherboard drives the system at up to 24000mm/min maximum working speed. The ultra-fine 0.08*0.1mm laser focus area and built-in 256-bit colour scale maintain detail during long runs. An air-assist interface is reserved for external pumps to keep surfaces clean during extended cuts.

Cutting limits on wood, acrylic and steel

In a single pass the engraver cuts 15mm pine wood and 8mm acrylic, while multiple passes reach 25mm wood and 35mm acrylic. It can also cut 0.05mm stainless steel. The 120W DC24V5A input powers the 20W laser module within these material constraints. The 14.7x14.7 inch cutting area defines the maximum project footprint for any job.

Ciri-ciri utama

  • 20W output power cuts 15mm pine and 8mm acrylic in one pass
  • 08×0.1mm ultra-fine laser focus with 256-bit colour scale for finer engraving detail
  • 5" colour touchscreen plus SD card, USB, APP and Wi-Fi connection options
  • Control multiple engravers from one terminal for parallel production workflows
  • 400×365mm work area with 24,000mm/min max speed for efficient desktop engraving

Spesifikasi

BrandLonger
SeriesRay5
ModelRay5 20W
TypeLaser Engraver
TechnologyDioser Technology
Output PowerDC24V5A 120W
Work Area400x365mm (15.75x14.37inch)
Max Working Speed24000mm/min
ColorBlack
Featuresdesktop-level
Dimensions24.4*13.7*5in
Weight5.55kg

Versi lain model ini

1 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How much power does the 120 W supply draw when the Ray5 20W runs all day?

The engraver is powered by a DC 24 V 5 A 120 W supply; actual draw depends on laser duty cycle and the 24 000 mm/min maximum speed setting.

What must I already own to use the air-assist interface reserved on this engraver?

An external air pump and suitable hose — the machine provides only the interface.

Will the 3.5" touchscreen and Wi-Fi connection work with my older Windows 7 laptop?

The engraver offers SD card, USB, Wi-Fi and app control; the touchscreen operates the unit directly without any PC, so the laptop OS is irrelevant.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.