LORDWORLD
LORDWORLD 4 Bay 2.5" SATA/SAS Hot-Swap Docking Enclosure 5.25" Bay
Holds four 2.5" SATA or SAS drives in a single 5.25" bay with hot-swap trays
- Hot-swap four drives without tools
- Fits four 2.5" SAS/SATA SSDs or HDDs from 5 mm to 9.5 mm thick
- Mounts in a standard 5.25" front bay
- Supports both SATA and SAS interfaces for mixed drive sets
4-bay 2.5" SAS/SATA hot-swap enclosure
This LORDWORLD enclosure fits a single 5.25" bay and accepts up to four 2.5" SAS or SATA hard drives or SSDs between 5 mm and 9.5 mm thick. It is aimed at system builders and technicians who need to add or swap multiple drives without opening the chassis. Hot-swap trays allow each drive to be inserted or removed while the system is running.
Practical limits of SATA and SAS
The SATA and SAS interfaces used here top out at 6 Gbps, so drive throughput cannot exceed that ceiling regardless of the SSD installed. Each bay requires its own data and power connection to the host, consuming four SATA ports and four power leads. Drive height must stay within the 5 mm to 9.5 mm range; taller 2.5" drives will not fit.
Ciri-ciri utama
- Hot-swap four drives without tools
- Fits four 2.5" SAS/SATA SSDs or HDDs from 5 mm to 9.5 mm thick
- Mounts in a standard 5.25" front bay
- Supports both SATA and SAS interfaces for mixed drive sets
Spesifikasi
| Brand | LORDWORLD |
|---|
Soalan tentang produk ini
Should I choose the 5 mm or 9.5 mm drive height for the four 2.5" bays?
Both heights fit; each bay accepts 2.5" SATA or SAS drives from 5 mm up to 9.5 mm thick.
What does the 5.25" bay specification mean for installation?
The enclosure mounts in a standard 5.25" front bay and provides four hot-swap trays for 2.5" SATA/SAS drives.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



