Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green rectangular DDR4 SODIMM module with black chips, gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 2Rx8 260-pin SODIMM for POSIFLEX HS-3314 memory upgrade

SKU CH-D8TB-2YBEB

16GB DDR4 2666 SODIMM module with CL19 latency and 1.2V operation for POSIFLEX HS-3314 terminals

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 2666 boosts POS terminal speed
  • CL19 latency keeps transactions responsive
  • 2V low voltage reduces power draw
  • 2Rx8 dual-rank layout maximises 16GB density
  • 260-pin SODIMM fits POSIFLEX HS-3314 exactly

POSIFLEX HS-3314 terminal memory upgrade

This 16 GB DDR4 SODIMM is built for the POSIFLEX HS-3314 compact all-in-one terminal. It targets retailers and system integrators who need a single-module capacity increase for point-of-sale workloads. The module runs at 2666 MT/s with CL19 latency.

260-pin unbuffered SODIMM form factor

The stick uses a standard 260-pin DDR4 SODIMM edge connector and requires no heat spreader, keeping the profile low for tight terminal chassis. It is non-ECC and unbuffered, matching the platform's memory controller. Installation follows the usual SODIMM slot procedure.

1.2 V operation at DDR4 2666

Rated at 1.20 V, the module draws minimal power and generates little heat inside the enclosed terminal. No active cooling is needed on the memory itself. The 2Rx8 organisation provides standard density for stable operation under continuous POS loads.

Ciri-ciri utama

  • 16GB DDR4 2666 boosts POS terminal speed
  • CL19 latency keeps transactions responsive
  • 2V low voltage reduces power draw
  • 2Rx8 dual-rank layout maximises 16GB density
  • 260-pin SODIMM fits POSIFLEX HS-3314 exactly

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-628K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Soalan tentang produk ini

Does the DDR4 2666 PC4-21300 module run at 2666 MT/s in the POSIFLEX HS-3314?

Yes, the SODIMM is rated DDR4 2666 (PC4-21300) and will operate at that speed when the platform supports it.

Will the 260-pin SODIMM fit the memory slot in the POSIFLEX HS-3314?

The module uses the standard 260-pin DDR4 SODIMM form factor specified for the HS-3314, so it fits the SO-DIMM socket.

What is the correct way to seat this 1.2 V SODIMM and what step is often missed?

Insert the module at about 30 degrees until the gold contacts disappear, then press down firmly until both side clips click; the step often missed is not pushing far enough for the clips to engage.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.