BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278355BTC
I lager
NEMIX RAM
NEMIX RAM 16GB DDR4 2666 CL19 2Rx8 260-pin SODIMM for POSIFLEX HS-3314 memory upgrade
16GB DDR4 2666 SODIMM module with CL19 latency and 1.2V operation for POSIFLEX HS-3314 terminals
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 2666 boosts POS terminal speed
- CL19 latency keeps transactions responsive
- 2V low voltage reduces power draw
- 2Rx8 dual-rank layout maximises 16GB density
- 260-pin SODIMM fits POSIFLEX HS-3314 exactly
POSIFLEX HS-3314 terminal memory upgrade
This 16 GB DDR4 SODIMM is built for the POSIFLEX HS-3314 compact all-in-one terminal. It targets retailers and system integrators who need a single-module capacity increase for point-of-sale workloads. The module runs at 2666 MT/s with CL19 latency.
260-pin unbuffered SODIMM form factor
The stick uses a standard 260-pin DDR4 SODIMM edge connector and requires no heat spreader, keeping the profile low for tight terminal chassis. It is non-ECC and unbuffered, matching the platform's memory controller. Installation follows the usual SODIMM slot procedure.
1.2 V operation at DDR4 2666
Rated at 1.20 V, the module draws minimal power and generates little heat inside the enclosed terminal. No active cooling is needed on the memory itself. The 2Rx8 organisation provides standard density for stable operation under continuous POS loads.
I korthet
- 16GB DDR4 2666 boosts POS terminal speed
- CL19 latency keeps transactions responsive
- 2V low voltage reduces power draw
- 2Rx8 dual-rank layout maximises 16GB density
- 260-pin SODIMM fits POSIFLEX HS-3314 exactly
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS21300-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM |
Frågor om den här produkten
Does the DDR4 2666 PC4-21300 module run at 2666 MT/s in the POSIFLEX HS-3314?
Yes, the SODIMM is rated DDR4 2666 (PC4-21300) and will operate at that speed when the platform supports it.
Will the 260-pin SODIMM fit the memory slot in the POSIFLEX HS-3314?
The module uses the standard 260-pin DDR4 SODIMM form factor specified for the HS-3314, so it fits the SO-DIMM socket.
What is the correct way to seat this 1.2 V SODIMM and what step is often missed?
Insert the module at about 30 degrees until the gold contacts disappear, then press down firmly until both side clips click; the step often missed is not pushing far enough for the clips to engage.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
