NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 SODIMM POSIFLEX PS-3616-G2 memory upgrade
16 GB DDR4 3200 SODIMM for POSIFLEX PS-3616-G2 terminal, CL22 1.2 V 2Rx8 260-pin non-ECC
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 3200MHz boosts POS terminal speed
- CL22 latency at 1.2V ensures stable operation
- 2Rx8 dual-rank design maximises memory density
- 260-pin SODIMM fits PS-3616-G2 exactly
- Major OEM chips tested under load for reliability
System-Specific 16 GB DDR4 SODIMM
This 260-pin DDR4 module delivers 16 GB of non-ECC unbuffered memory rated at 3200 MT/s with CL22 latency. It is validated for the Posiflex PS-3616-G2 fanless touch-screen POS terminal and operates at the standard 1.2 V DDR4 voltage. The dual-rank 2Rx8 organisation uses major OEM DRAM from Samsung, Micron or Hynix.
Thermals and power in normal use
Running at 1.2 V keeps power draw low and heat output minimal inside the sealed, fanless chassis of the target terminal. No heat spreader is fitted, so the module relies on the system’s passive thermal design. The low-voltage DDR4 specification helps maintain quiet, reliable operation during continuous point-of-sale workloads.
Upgrade scope and when it matters
This single 16 GB stick replaces lower-capacity DDR4 SODIMMs in the PS-3616-G2 to raise the memory ceiling for multi-application POS software. The jump is worthwhile when the terminal runs simultaneous inventory, payment and loyalty programs that exceed the factory configuration. Buyers needing ECC, registered modules or a different form factor cannot use this product.
Ciri-ciri utama
- 16GB DDR4 3200MHz boosts POS terminal speed
- CL22 latency at 1.2V ensures stable operation
- 2Rx8 dual-rank design maximises memory density
- 260-pin SODIMM fits PS-3616-G2 exactly
- Major OEM chips tested under load for reliability
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Soalan tentang produk ini
How do I install this 260-pin DDR4 SODIMM in the POSIFLEX PS-3616-G2, and which step do people often miss?
Power off the terminal and disconnect the power adapter, remove the memory cover, align the notch on the module with the slot key, insert at an angle then press down until the side clips click — the step most often missed is verifying both clips lock fully before reassembling.
What maintenance or replacement will this 16GB CL22 module need over time?
No scheduled maintenance is required; the module has no heat spreader and runs at 1.2V, so only replace it if a memory test reports errors or if the workload later demands more than 16GB of capacity.
What limit appears first when this POSIFLEX memory runs sustained workloads?
The CL22 latency at 3200 MT/s sets the throughput ceiling; under continuous load the memory controller will hit that timing bottleneck before the 1.2V power envelope or the 2Rx8 rank organisation becomes a constraint.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



