SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
16 GB DDR4 3200 SODIMM for POSIFLEX PS-3616-G2 terminal, CL22 1.2 V 2Rx8 260-pin non-ECC
This 260-pin DDR4 module delivers 16 GB of non-ECC unbuffered memory rated at 3200 MT/s with CL22 latency. It is validated for the Posiflex PS-3616-G2 fanless touch-screen POS terminal and operates at the standard 1.2 V DDR4 voltage. The dual-rank 2Rx8 organisation uses major OEM DRAM from Samsung, Micron or Hynix.
Running at 1.2 V keeps power draw low and heat output minimal inside the sealed, fanless chassis of the target terminal. No heat spreader is fitted, so the module relies on the system’s passive thermal design. The low-voltage DDR4 specification helps maintain quiet, reliable operation during continuous point-of-sale workloads.
This single 16 GB stick replaces lower-capacity DDR4 SODIMMs in the PS-3616-G2 to raise the memory ceiling for multi-application POS software. The jump is worthwhile when the terminal runs simultaneous inventory, payment and loyalty programs that exceed the factory configuration. Buyers needing ECC, registered modules or a different form factor cannot use this product.
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Power off the terminal and disconnect the power adapter, remove the memory cover, align the notch on the module with the slot key, insert at an angle then press down until the side clips click — the step most often missed is verifying both clips lock fully before reassembling.
No scheduled maintenance is required; the module has no heat spreader and runs at 1.2V, so only replace it if a memory test reports errors or if the workload later demands more than 16GB of capacity.
The CL22 latency at 3200 MT/s sets the throughput ceiling; under continuous load the memory controller will hit that timing bottleneck before the 1.2V power envelope or the 2Rx8 rank organisation becomes a constraint.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?