我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular DDR4 SODIMM module with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 SODIMM POSIFLEX PS-3616-G2 memory upgrade

SKU CH-9ZGG-SQ6TA

16 GB DDR4 3200 SODIMM for POSIFLEX PS-3616-G2 terminal, CL22 1.2 V 2Rx8 260-pin non-ECC

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 3200MHz boosts POS terminal speed
  • CL22 latency at 1.2V ensures stable operation
  • 2Rx8 dual-rank design maximises memory density
  • 260-pin SODIMM fits PS-3616-G2 exactly
  • Major OEM chips tested under load for reliability

System-Specific 16 GB DDR4 SODIMM

This 260-pin DDR4 module delivers 16 GB of non-ECC unbuffered memory rated at 3200 MT/s with CL22 latency. It is validated for the Posiflex PS-3616-G2 fanless touch-screen POS terminal and operates at the standard 1.2 V DDR4 voltage. The dual-rank 2Rx8 organisation uses major OEM DRAM from Samsung, Micron or Hynix.

Thermals and power in normal use

Running at 1.2 V keeps power draw low and heat output minimal inside the sealed, fanless chassis of the target terminal. No heat spreader is fitted, so the module relies on the system’s passive thermal design. The low-voltage DDR4 specification helps maintain quiet, reliable operation during continuous point-of-sale workloads.

Upgrade scope and when it matters

This single 16 GB stick replaces lower-capacity DDR4 SODIMMs in the PS-3616-G2 to raise the memory ceiling for multi-application POS software. The jump is worthwhile when the terminal runs simultaneous inventory, payment and loyalty programs that exceed the factory configuration. Buyers needing ECC, registered modules or a different form factor cannot use this product.

商品特色

  • 16GB DDR4 3200MHz boosts POS terminal speed
  • CL22 latency at 1.2V ensures stable operation
  • 2Rx8 dual-rank design maximises memory density
  • 260-pin SODIMM fits PS-3616-G2 exactly
  • Major OEM chips tested under load for reliability

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

商品問答

How do I install this 260-pin DDR4 SODIMM in the POSIFLEX PS-3616-G2, and which step do people often miss?

Power off the terminal and disconnect the power adapter, remove the memory cover, align the notch on the module with the slot key, insert at an angle then press down until the side clips click — the step most often missed is verifying both clips lock fully before reassembling.

What maintenance or replacement will this 16GB CL22 module need over time?

No scheduled maintenance is required; the module has no heat spreader and runs at 1.2V, so only replace it if a memory test reports errors or if the workload later demands more than 16GB of capacity.

What limit appears first when this POSIFLEX memory runs sustained workloads?

The CL22 latency at 3200 MT/s sets the throughput ceiling; under continuous load the memory controller will hit that timing bottleneck before the 1.2V power envelope or the 2Rx8 rank organisation becomes a constraint.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。