Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Four green DDR5 UDIMM sticks in static bags

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V 288-pin UDIMM Dell Pro Precision 7 T1 memory upgrade

SKU CH-36JJ-YTPQJ

Four 16 GB DDR5 modules running at 5600 MHz with CL46 latency and 1.1 V, built for Dell Pro Precision 7 T1 desktops

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity from four 16 GB modules
  • DDR5 5600 speed with CL46 latency for responsive performance
  • Low 1.1 V operation reduces power draw and heat
  • Non-ECC unbuffered UDIMM design fits standard desktop slots
  • Validated compatibility with Dell Pro Precision 7 T1 workstations

Dell Pro Precision 7 T1 memory kit

This 64 GB kit contains four 16 GB DDR5 UDIMM modules built for the Dell Pro Precision 7 T1 desktop. Each stick runs at 5600 MHz with a CL46 latency and operates at 1.10 V. The unbuffered, non-ECC design matches the workstation's standard memory slots.

Suits owners of a Dell Pro Precision 7 T1 needing

Buyers whose system requires registered or ECC memory cannot use this kit. The modules lack a heat spreader, so they are not intended for builds that demand active cooling on every stick.

DDR5 5600 CL46 1.10 V specification

The DDR5 5600 CL46 1.10 V rating determines whether the memory will train at the rated speed on the Dell Pro Precision 7 T1. If the platform only supports a lower data rate or a different voltage, the kit will not perform as specified.

Ciri-ciri utama

  • 64 GB total capacity from four 16 GB modules
  • DDR5 5600 speed with CL46 latency for responsive performance
  • Low 1.1 V operation reduces power draw and heat
  • Non-ECC unbuffered UDIMM design fits standard desktop slots
  • Validated compatibility with Dell Pro Precision 7 T1 workstations

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Soalan tentang produk ini

Does my Dell Pro Precision 7 T1 need four free 288-pin DDR5 slots to install this 64 GB kit?

Yes — the kit contains four 16 GB modules, each a 288-pin DDR5 UDIMM, so the system must provide four unoccupied DDR5 DIMM sockets.

Will the memory run at 5600 MHz if the platform defaults to a lower JEDEC speed?

The modules are rated DDR5 5600 (PC5-44800) CL46 at 1.1 V; the final operating speed depends on the motherboard’s memory controller and BIOS settings.

How can I confirm the kit is detected at 5600 MT/s and CL46 after installation?

Check the memory speed and timings in the UEFI/BIOS setup screen or use a system-information utility such as CPU-Z to verify 5600 MT/s and CL46 values.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.