BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278806BTC
재고 있음
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V 288-pin UDIMM Dell Pro Precision 7 T1 memory upgrade
Four 16 GB DDR5 modules running at 5600 MHz with CL46 latency and 1.1 V, built for Dell Pro Precision 7 T1 desktops
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity from four 16 GB modules
- DDR5 5600 speed with CL46 latency for responsive performance
- Low 1.1 V operation reduces power draw and heat
- Non-ECC unbuffered UDIMM design fits standard desktop slots
- Validated compatibility with Dell Pro Precision 7 T1 workstations
Dell Pro Precision 7 T1 memory kit
This 64 GB kit contains four 16 GB DDR5 UDIMM modules built for the Dell Pro Precision 7 T1 desktop. Each stick runs at 5600 MHz with a CL46 latency and operates at 1.10 V. The unbuffered, non-ECC design matches the workstation's standard memory slots.
Suits owners of a Dell Pro Precision 7 T1 needing
Buyers whose system requires registered or ECC memory cannot use this kit. The modules lack a heat spreader, so they are not intended for builds that demand active cooling on every stick.
DDR5 5600 CL46 1.10 V specification
The DDR5 5600 CL46 1.10 V rating determines whether the memory will train at the rated speed on the Dell Pro Precision 7 T1. If the platform only supports a lower data rate or a different voltage, the kit will not perform as specified.
주요 특징
- 64 GB total capacity from four 16 GB modules
- DDR5 5600 speed with CL46 latency for responsive performance
- Low 1.1 V operation reduces power draw and heat
- Non-ECC unbuffered UDIMM design fits standard desktop slots
- Validated compatibility with Dell Pro Precision 7 T1 workstations
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
이 상품에 대한 질문
Does my Dell Pro Precision 7 T1 need four free 288-pin DDR5 slots to install this 64 GB kit?
Yes — the kit contains four 16 GB modules, each a 288-pin DDR5 UDIMM, so the system must provide four unoccupied DDR5 DIMM sockets.
Will the memory run at 5600 MHz if the platform defaults to a lower JEDEC speed?
The modules are rated DDR5 5600 (PC5-44800) CL46 at 1.1 V; the final operating speed depends on the motherboard’s memory controller and BIOS settings.
How can I confirm the kit is detected at 5600 MT/s and CL46 after installation?
Check the memory speed and timings in the UEFI/BIOS setup screen or use a system-information utility such as CPU-Z to verify 5600 MT/s and CL46 values.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
