Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 288-Pin UDIMM memory upgrade

SKU CH-K8K6-8VGCG

8GB DDR4 2133 PC4-17000 CL15 288-pin UDIMM for Samsung desktop upgrade

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity lifts multitasking headroom for everyday workloads
  • DDR4 2133 speed matches PC4-17000 bandwidth spec
  • CL15 latency keeps response tight under load
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop DIMM slots

Samsung Desktop DDR4 Upgrade

This NEMIX RAM module provides 8 GB of DDR4 memory at 2133 MT/s with CL15 latency. It uses a 288-pin UDIMM form factor and operates at 1.20 V. The stick is unbuffered, non-ECC and built with Samsung, Micron or Hynix components for Samsung desktop systems.

Suits Samsung desktop owners, not ECC builds

Buyers upgrading a compatible Samsung desktop PC gain a straightforward capacity increase. Builders who need error-correcting code memory or registered modules should look elsewhere, as this stick is non-ECC and unbuffered.

2133 MT/s DDR4 speed rating

The module runs at DDR4 2133 (PC4-17000). If the target system requires a different DDR4 data rate or a DDR5 platform, this part will not match the required specification.

Ciri-ciri utama

  • 8GB capacity lifts multitasking headroom for everyday workloads
  • DDR4 2133 speed matches PC4-17000 bandwidth spec
  • CL15 latency keeps response tight under load
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop DIMM slots

Spesifikasi

BrandNEMIX RAM
SeriesSamsung Desktop PC Compatible Series Memory
ModelSamsung DDR4 2133MHZ Non-ECC Unbuffered UDIMM
Part NumberMD17000-818K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSamsung
CAS LatencyCL15
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx8 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM

Soalan tentang produk ini

What motherboard slot and voltage does the 288-pin UDIMM need to work?

The module fits a standard DDR4 288-pin UDIMM slot and runs at 1.20 V, so the board must support DDR4 at that voltage.

Will the CL15 timing slow down my existing 2133 MHz sticks if I keep them?

The system will run all modules at the slowest common timing; if your current memory is also CL15 at 2133 MHz there is no change, otherwise the faster sticks drop to match.

How can I confirm the 8 GB module is recognised at the rated speed after install?

Open the BIOS or a tool such as CPU-Z and verify the memory reads 2133 MHz, CL15, 1Rx8 and 8 GB total capacity.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.