SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00504076BTC
재고 있음
NEMIX RAM
NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 288-Pin UDIMM memory upgrade
8GB DDR4 2133 PC4-17000 CL15 288-pin UDIMM for Samsung desktop upgrade
- Capacity8GB
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB capacity lifts multitasking headroom for everyday workloads
- DDR4 2133 speed matches PC4-17000 bandwidth spec
- CL15 latency keeps response tight under load
- 20V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop DIMM slots
Samsung Desktop DDR4 Upgrade
This NEMIX RAM module provides 8 GB of DDR4 memory at 2133 MT/s with CL15 latency. It uses a 288-pin UDIMM form factor and operates at 1.20 V. The stick is unbuffered, non-ECC and built with Samsung, Micron or Hynix components for Samsung desktop systems.
Suits Samsung desktop owners, not ECC builds
Buyers upgrading a compatible Samsung desktop PC gain a straightforward capacity increase. Builders who need error-correcting code memory or registered modules should look elsewhere, as this stick is non-ECC and unbuffered.
2133 MT/s DDR4 speed rating
The module runs at DDR4 2133 (PC4-17000). If the target system requires a different DDR4 data rate or a DDR5 platform, this part will not match the required specification.
주요 특징
- 8GB capacity lifts multitasking headroom for everyday workloads
- DDR4 2133 speed matches PC4-17000 bandwidth spec
- CL15 latency keeps response tight under load
- 20V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop DIMM slots
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Desktop PC Compatible Series Memory |
| Model | Samsung DDR4 2133MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD17000-818K1 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Samsung |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx8 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM |
이 상품에 대한 질문
What motherboard slot and voltage does the 288-pin UDIMM need to work?
The module fits a standard DDR4 288-pin UDIMM slot and runs at 1.20 V, so the board must support DDR4 at that voltage.
Will the CL15 timing slow down my existing 2133 MHz sticks if I keep them?
The system will run all modules at the slowest common timing; if your current memory is also CL15 at 2133 MHz there is no change, otherwise the faster sticks drop to match.
How can I confirm the 8 GB module is recognised at the rated speed after install?
Open the BIOS or a tool such as CPU-Z and verify the memory reads 2133 MHz, CL15, 1Rx8 and 8 GB total capacity.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
