暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 288-Pin UDIMM memory upgrade

SKU CH-K8K6-8VGCG

8GB DDR4 2133 PC4-17000 CL15 288-pin UDIMM for Samsung desktop upgrade

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity lifts multitasking headroom for everyday workloads
  • DDR4 2133 speed matches PC4-17000 bandwidth spec
  • CL15 latency keeps response tight under load
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop DIMM slots

Samsung Desktop DDR4 Upgrade

This NEMIX RAM module provides 8 GB of DDR4 memory at 2133 MT/s with CL15 latency. It uses a 288-pin UDIMM form factor and operates at 1.20 V. The stick is unbuffered, non-ECC and built with Samsung, Micron or Hynix components for Samsung desktop systems.

Suits Samsung desktop owners, not ECC builds

Buyers upgrading a compatible Samsung desktop PC gain a straightforward capacity increase. Builders who need error-correcting code memory or registered modules should look elsewhere, as this stick is non-ECC and unbuffered.

2133 MT/s DDR4 speed rating

The module runs at DDR4 2133 (PC4-17000). If the target system requires a different DDR4 data rate or a DDR5 platform, this part will not match the required specification.

特長

  • 8GB capacity lifts multitasking headroom for everyday workloads
  • DDR4 2133 speed matches PC4-17000 bandwidth spec
  • CL15 latency keeps response tight under load
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop DIMM slots

仕様

BrandNEMIX RAM
SeriesSamsung Desktop PC Compatible Series Memory
ModelSamsung DDR4 2133MHZ Non-ECC Unbuffered UDIMM
Part NumberMD17000-818K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSamsung
CAS LatencyCL15
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx8 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM

この商品に関する質問

What motherboard slot and voltage does the 288-pin UDIMM need to work?

The module fits a standard DDR4 288-pin UDIMM slot and runs at 1.20 V, so the board must support DDR4 at that voltage.

Will the CL15 timing slow down my existing 2133 MHz sticks if I keep them?

The system will run all modules at the slowest common timing; if your current memory is also CL15 at 2133 MHz there is no change, otherwise the faster sticks drop to match.

How can I confirm the 8 GB module is recognised at the rated speed after install?

Open the BIOS or a tool such as CPU-Z and verify the memory reads 2133 MHz, CL15, 1Rx8 and 8 GB total capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。