NEMIX RAM
NEMIX RAM DDR5-6400 256GB (16x16GB) CL52 1Rx8 ECC RDIMM Supermicro H14DST-F memory upgrade
A 256 GB DDR5 ECC registered memory kit of sixteen 16 GB modules running at 6400 MHz with CL52 latency, 1.1 V operation and 288-pin RDIMM form factor, validated for the Supermicro H14DST-F motherboard
- Capacity256GB (16 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB capacity in a 16-module kit lets you fully populate the server
- DDR5-6400 speed with CL52 latency delivers the rated bandwidth your board expects
- Registered ECC architecture corrects single-bit errors and stabilises every slot at full load
- 1 V operation at 1Rx8 rank matches the motherboard's voltage and timing requirements
- Validated for the Supermicro H14DST-F so the 288-pin RDIMMs are recognised immediately
256GB DDR5-6400 ECC RDIMM kit
This 256GB kit contains sixteen 16GB DDR5-6400 Registered ECC modules built for the Supermicro H14DST-F motherboard. Each DIMM runs at 1.1V with CL52 latency and a 1Rx8 organisation. The registered design lets the board run fully populated without overloading the memory controller.
Verify motherboard population rules
Check the Supermicro H14DST-F manual for approved DIMM population order, maximum supported capacity per slot and any BIOS version requirements before installing. The board requires 288-pin Registered RDIMMs; UDIMM or SODIMM modules will not fit or function. Confirm your configuration matches the 1Rx8 rank and 1.1V voltage specified for this kit.
Sixteen-module kit simplifies deployment
The package delivers all sixteen 16GB modules in a single matched kit so you can fill every supported slot at once. Pre-validated rank, voltage and timing eliminate the guesswork of mixing individual sticks. No heat spreaders are included, so ensure your chassis airflow meets the server's thermal design.
Ciri-ciri utama
- 256 GB capacity in a 16-module kit lets you fully populate the server
- DDR5-6400 speed with CL52 latency delivers the rated bandwidth your board expects
- Registered ECC architecture corrects single-bit errors and stabilises every slot at full load
- 1 V operation at 1Rx8 rank matches the motherboard's voltage and timing requirements
- Validated for the Supermicro H14DST-F so the 288-pin RDIMMs are recognised immediately
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 16X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
Does the kit contain all 16 modules or do I need to buy extra DIMMs?
The package includes 16 modules totalling 256 GB, so no additional DIMMs are required for a full population.
My board has 16 DDR5 slots — is this 16×16 GB kit the right match?
Yes, the kit provides one 16 GB RDIMM for each of the 16 slots, matching the board's maximum supported capacity.
Will the DDR5-6400 speed run at 6400 MT/s on my Supermicro H14DST-F?
The modules are specced for DDR5-6400 CL52 at 1.1 V, and the kit is verified for that motherboard, so the memory controller will recognise and run them at the rated speed.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
USD 104.99
0.00133326BTC
Ada stok
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
USD 7.99
0.00010146BTC
Ada stok