暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5-6400 256GB (16x16GB) CL52 1Rx8 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-PCCZ-96MXM

A 256 GB DDR5 ECC registered memory kit of sixteen 16 GB modules running at 6400 MHz with CL52 latency, 1.1 V operation and 288-pin RDIMM form factor, validated for the Supermicro H14DST-F motherboard

  • Capacity256GB (16 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256 GB capacity in a 16-module kit lets you fully populate the server
  • DDR5-6400 speed with CL52 latency delivers the rated bandwidth your board expects
  • Registered ECC architecture corrects single-bit errors and stabilises every slot at full load
  • 1 V operation at 1Rx8 rank matches the motherboard's voltage and timing requirements
  • Validated for the Supermicro H14DST-F so the 288-pin RDIMMs are recognised immediately

256GB DDR5-6400 ECC RDIMM kit

This 256GB kit contains sixteen 16GB DDR5-6400 Registered ECC modules built for the Supermicro H14DST-F motherboard. Each DIMM runs at 1.1V with CL52 latency and a 1Rx8 organisation. The registered design lets the board run fully populated without overloading the memory controller.

Verify motherboard population rules

Check the Supermicro H14DST-F manual for approved DIMM population order, maximum supported capacity per slot and any BIOS version requirements before installing. The board requires 288-pin Registered RDIMMs; UDIMM or SODIMM modules will not fit or function. Confirm your configuration matches the 1Rx8 rank and 1.1V voltage specified for this kit.

Sixteen-module kit simplifies deployment

The package delivers all sixteen 16GB modules in a single matched kit so you can fill every supported slot at once. Pre-validated rank, voltage and timing eliminate the guesswork of mixing individual sticks. No heat spreaders are included, so ensure your chassis airflow meets the server's thermal design.

特長

  • 256 GB capacity in a 16-module kit lets you fully populate the server
  • DDR5-6400 speed with CL52 latency delivers the rated bandwidth your board expects
  • Registered ECC architecture corrects single-bit errors and stabilises every slot at full load
  • 1 V operation at 1Rx8 rank matches the motherboard's voltage and timing requirements
  • Validated for the Supermicro H14DST-F so the 288-pin RDIMMs are recognised immediately

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K16
Capacity256GB (16 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 16X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

Does the kit contain all 16 modules or do I need to buy extra DIMMs?

The package includes 16 modules totalling 256 GB, so no additional DIMMs are required for a full population.

My board has 16 DDR5 slots — is this 16×16 GB kit the right match?

Yes, the kit provides one 16 GB RDIMM for each of the 16 slots, matching the board's maximum supported capacity.

Will the DDR5-6400 speed run at 6400 MT/s on my Supermicro H14DST-F?

The modules are specced for DDR5-6400 CL52 at 1.1 V, and the kit is verified for that motherboard, so the memory controller will recognise and run them at the rated speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。