NEMIX RAM
NEMIX RAM DDR5-6400 256GB (16x16GB) CL52 1Rx8 ECC RDIMM Supermicro H14DST-F memory upgrade
A 256 GB DDR5 ECC registered memory kit of sixteen 16 GB modules running at 6400 MHz with CL52 latency, 1.1 V operation and 288-pin RDIMM form factor, validated for the Supermicro H14DST-F motherboard
- Capacity256GB (16 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB capacity in a 16-module kit lets you fully populate the server
- DDR5-6400 speed with CL52 latency delivers the rated bandwidth your board expects
- Registered ECC architecture corrects single-bit errors and stabilises every slot at full load
- 1 V operation at 1Rx8 rank matches the motherboard's voltage and timing requirements
- Validated for the Supermicro H14DST-F so the 288-pin RDIMMs are recognised immediately
256GB DDR5-6400 ECC RDIMM kit
This 256GB kit contains sixteen 16GB DDR5-6400 Registered ECC modules built for the Supermicro H14DST-F motherboard. Each DIMM runs at 1.1V with CL52 latency and a 1Rx8 organisation. The registered design lets the board run fully populated without overloading the memory controller.
Verify motherboard population rules
Check the Supermicro H14DST-F manual for approved DIMM population order, maximum supported capacity per slot and any BIOS version requirements before installing. The board requires 288-pin Registered RDIMMs; UDIMM or SODIMM modules will not fit or function. Confirm your configuration matches the 1Rx8 rank and 1.1V voltage specified for this kit.
Sixteen-module kit simplifies deployment
The package delivers all sixteen 16GB modules in a single matched kit so you can fill every supported slot at once. Pre-validated rank, voltage and timing eliminate the guesswork of mixing individual sticks. No heat spreaders are included, so ensure your chassis airflow meets the server's thermal design.
จุดเด่น
- 256 GB capacity in a 16-module kit lets you fully populate the server
- DDR5-6400 speed with CL52 latency delivers the rated bandwidth your board expects
- Registered ECC architecture corrects single-bit errors and stabilises every slot at full load
- 1 V operation at 1Rx8 rank matches the motherboard's voltage and timing requirements
- Validated for the Supermicro H14DST-F so the 288-pin RDIMMs are recognised immediately
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 16X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
Does the kit contain all 16 modules or do I need to buy extra DIMMs?
The package includes 16 modules totalling 256 GB, so no additional DIMMs are required for a full population.
My board has 16 DDR5 slots — is this 16×16 GB kit the right match?
Yes, the kit provides one 16 GB RDIMM for each of the 16 slots, matching the board's maximum supported capacity.
Will the DDR5-6400 speed run at 6400 MT/s on my Supermicro H14DST-F?
The modules are specced for DDR5-6400 CL52 at 1.1 V, and the kit is verified for that motherboard, so the memory controller will recognise and run them at the rated speed.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



