Orico 2.5" SATA to USB 3.0 Drive Enclosure DIY Sticker 6TB
- 2.5"
- Black
Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.
Orico
A 2.5-inch SATA drive enclosure with USB 3.0 interface delivering 5 Gbps transfer speed for 7mm and 9.5mm drives up to 4TB capacity
Size USB 3.0
This Orico 2.5 inch enclosure converts a SATA solid-state drive or hard disk into an external USB 3.0 storage device. It accepts a single 2.5 inch drive measuring 7mm or 9.5mm thick and supports capacities up to 6TB per bay. The black ABS shell uses a grid texture for grip and passive cooling, and the tool-free design lets you swap drives without a screwdriver. Power comes entirely from the USB connection, so no separate adapter is needed.
Laptop and desktop users who want a lightweight, portable way to access a spare 2.5 inch SATA drive will find the plug-and-play operation convenient. LED status indication and driver-free hot-swap support simplify daily use. Builders needing 3.5 inch drive support, multi-bay RAID configurations, or an external power supply for sustained heavy workloads should look at a different enclosure class.
The external interface is USB 3.0 with a 5 Gbps theoretical maximum transfer rate, falling back to 480 Mbps on USB 2.0 ports. The internal connection is SATA 3.0, so the enclosure will not limit a modern SATA SSD beyond the USB bus ceiling. If your workflow demands sustained throughput above the USB 3.0 limit, this enclosure will not meet that requirement.
| Brand | ORICO |
|---|---|
| Color | Black |
| Size | 2.5" |
| Type | Enclosure |
| AC Adapter | No |
| Material | Plastic |
| Internal Interface | SATA |
| External Interface | SATA |
| HDD Count Supported | Single HDD |
| Number of Bay | 1 Bay |
| Maximum Capacity (per Bay) | Up to 6TB |
Versi lain model ini
Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.
It fits both 7 mm and 9.5 mm SATA drives, so standard laptop hard drives and SSDs will mount without spacers.
Slide the drive into the SATA connector, close the lid and the internal latch holds it — no screws or tools are required.
No AC adapter is included; it draws power from the USB 3.0 port, which supports drives up to the stated capacity limit.
Juga di rak ini
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Apa yang anda hantar untuk membayar, dan mata wang yang anda guna untuk membaca harga.
Dihantar daripada dompet anda semasa semak keluar
Untuk paparan sahaja — katalog diberi harga dalam USD
Tiada mata wang yang sepadan.
Pilih bahasa yang digunakan oleh laman web ini.
Tiada bahasa yang sepadan.
Pengguna baharu?
Sudah mempunyai akaun?
Tiada set semula automatik: kedai ini tidak menghantar sebarang e-mel, jadi tiada pautan sekali guna untuk diminta. Biarkan alamat pada akaun tersebut, ia akan diuruskan secara manual.
Permintaan direkodkan
Tiada apa-apa akan sampai ke peti masuk anda — kedai ini tidak menghantar sebarang e-mel. Seseorang akan menguruskannya secara manual.
Sudah teringat?