Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Four spools of 1.75mm filament in white, black, translucent clear and wood colours

PrintOxe

PrintOxe PLA+ Pro PLA 4-Pack 1.75mm 1kg Filament 3D Printers Accessories

SKU CH-T4PJ-JK2PM

A four-colour PLA+ filament set totalling 8.8 lbs with ±.03 mm accuracy for 1.75 mm FDM printers

  • TypeFilament
  • Four colours in one pack give variety for multi-part prints
  • Dimensional accuracy of +/- .03 mm keeps layers consistent
  • 75 mm diameter fits most FDM printers
  • Vacuum sealed with desiccant protects filament from moisture
  • Extrusion temperature range 190 - 200 °C suits standard PLA+ settings

Four-colour PLA+ bundle

This pack supplies four one-kilogram spools of 1.75 mm PLA+ filament in black, white, translucent clear and wood colour. Each spool delivers a net weight of 1 kg for a total of 4 kg of material. The filament is vacuum-sealed with desiccant to resist moisture absorption. It targets makers who want a ready palette for multi-colour prints.

Upgrade from basic PLA

The PLA+ formulation reduces shrinkage and warping compared with standard PLA, giving stronger layer adhesion and fewer cracks or bubbles. The jump is worth it when functional parts need extra toughness or when large flat prints must stay dimensionally stable. Dimensional accuracy holds to ±0.03 mm across the 1.75 mm diameter. The wood colour is a pigment only, not a composite material.

Limits of 1.75 mm FDM

Compatible with common FDM printers that accept 1.75 mm filament, including many popular brands. The recommended nozzle temperature range is 190 °C to 200 °C (374 °F to 392 °F). Spool dimensions are 7.88 in diameter, 2.69 in width with a 2.20 in hub hole. Buyers who need higher temperature resistance or engineering-grade mechanical properties should consider other polymer families.

Ciri-ciri utama

  • Four colours in one pack give variety for multi-part prints
  • Dimensional accuracy of +/- .03 mm keeps layers consistent
  • 75 mm diameter fits most FDM printers
  • Vacuum sealed with desiccant protects filament from moisture
  • Extrusion temperature range 190 - 200 °C suits standard PLA+ settings

Spesifikasi

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

Soalan tentang produk ini

What spool dimensions does the 1.75 mm PrintOxe PLA+ filament use?

Each spool measures 7.88 inches in diameter, 2.69 inches wide, with a 2.20 inch hub hole, so it fits most standard filament holders.

How do I load the vacuum-sealed spool and avoid the common moisture mistake?

Cut the outer bag, leave the desiccant packet inside the box, then feed the filament end through the printer's guide tube; forgetting to reseal the bag between prints lets humidity degrade the material.

When should I replace a partially used spool of this PLA+?

Swap the spool when the remaining filament shows brittleness, inconsistent diameter beyond the +/- .03 mm tolerance, or causes frequent nozzle clogs at the recommended 190-200 °C range.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.