Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four spools of 1.75mm filament in white, black, translucent clear and wood colours

PrintOxe

PrintOxe PLA+ Pro PLA 4-Pack 1.75mm 1kg Filament 3D Printers Accessories

SKU CH-T4PJ-JK2PM

A four-colour PLA+ filament set totalling 8.8 lbs with ±.03 mm accuracy for 1.75 mm FDM printers

  • TypeFilament
  • Four colours in one pack give variety for multi-part prints
  • Dimensional accuracy of +/- .03 mm keeps layers consistent
  • 75 mm diameter fits most FDM printers
  • Vacuum sealed with desiccant protects filament from moisture
  • Extrusion temperature range 190 - 200 °C suits standard PLA+ settings

Four-colour PLA+ bundle

This pack supplies four one-kilogram spools of 1.75 mm PLA+ filament in black, white, translucent clear and wood colour. Each spool delivers a net weight of 1 kg for a total of 4 kg of material. The filament is vacuum-sealed with desiccant to resist moisture absorption. It targets makers who want a ready palette for multi-colour prints.

Upgrade from basic PLA

The PLA+ formulation reduces shrinkage and warping compared with standard PLA, giving stronger layer adhesion and fewer cracks or bubbles. The jump is worth it when functional parts need extra toughness or when large flat prints must stay dimensionally stable. Dimensional accuracy holds to ±0.03 mm across the 1.75 mm diameter. The wood colour is a pigment only, not a composite material.

Limits of 1.75 mm FDM

Compatible with common FDM printers that accept 1.75 mm filament, including many popular brands. The recommended nozzle temperature range is 190 °C to 200 °C (374 °F to 392 °F). Spool dimensions are 7.88 in diameter, 2.69 in width with a 2.20 in hub hole. Buyers who need higher temperature resistance or engineering-grade mechanical properties should consider other polymer families.

Puncte forte

  • Four colours in one pack give variety for multi-part prints
  • Dimensional accuracy of +/- .03 mm keeps layers consistent
  • 75 mm diameter fits most FDM printers
  • Vacuum sealed with desiccant protects filament from moisture
  • Extrusion temperature range 190 - 200 °C suits standard PLA+ settings

Specificații

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

Întrebări despre acest articol

What spool dimensions does the 1.75 mm PrintOxe PLA+ filament use?

Each spool measures 7.88 inches in diameter, 2.69 inches wide, with a 2.20 inch hub hole, so it fits most standard filament holders.

How do I load the vacuum-sealed spool and avoid the common moisture mistake?

Cut the outer bag, leave the desiccant packet inside the box, then feed the filament end through the printer's guide tube; forgetting to reseal the bag between prints lets humidity degrade the material.

When should I replace a partially used spool of this PLA+?

Swap the spool when the remaining filament shows brittleness, inconsistent diameter beyond the +/- .03 mm tolerance, or causes frequent nozzle clogs at the recommended 190-200 °C range.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.