暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four spools of 1.75mm filament in white, black, translucent clear and wood colours

PrintOxe

PrintOxe PLA+ Pro PLA 4-Pack 1.75mm 1kg Filament 3D Printers Accessories

SKU CH-T4PJ-JK2PM

A four-colour PLA+ filament set totalling 8.8 lbs with ±.03 mm accuracy for 1.75 mm FDM printers

  • TypeFilament
  • Four colours in one pack give variety for multi-part prints
  • Dimensional accuracy of +/- .03 mm keeps layers consistent
  • 75 mm diameter fits most FDM printers
  • Vacuum sealed with desiccant protects filament from moisture
  • Extrusion temperature range 190 - 200 °C suits standard PLA+ settings

Four-colour PLA+ bundle

This pack supplies four one-kilogram spools of 1.75 mm PLA+ filament in black, white, translucent clear and wood colour. Each spool delivers a net weight of 1 kg for a total of 4 kg of material. The filament is vacuum-sealed with desiccant to resist moisture absorption. It targets makers who want a ready palette for multi-colour prints.

Upgrade from basic PLA

The PLA+ formulation reduces shrinkage and warping compared with standard PLA, giving stronger layer adhesion and fewer cracks or bubbles. The jump is worth it when functional parts need extra toughness or when large flat prints must stay dimensionally stable. Dimensional accuracy holds to ±0.03 mm across the 1.75 mm diameter. The wood colour is a pigment only, not a composite material.

Limits of 1.75 mm FDM

Compatible with common FDM printers that accept 1.75 mm filament, including many popular brands. The recommended nozzle temperature range is 190 °C to 200 °C (374 °F to 392 °F). Spool dimensions are 7.88 in diameter, 2.69 in width with a 2.20 in hub hole. Buyers who need higher temperature resistance or engineering-grade mechanical properties should consider other polymer families.

特長

  • Four colours in one pack give variety for multi-part prints
  • Dimensional accuracy of +/- .03 mm keeps layers consistent
  • 75 mm diameter fits most FDM printers
  • Vacuum sealed with desiccant protects filament from moisture
  • Extrusion temperature range 190 - 200 °C suits standard PLA+ settings

仕様

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

この商品に関する質問

What spool dimensions does the 1.75 mm PrintOxe PLA+ filament use?

Each spool measures 7.88 inches in diameter, 2.69 inches wide, with a 2.20 inch hub hole, so it fits most standard filament holders.

How do I load the vacuum-sealed spool and avoid the common moisture mistake?

Cut the outer bag, leave the desiccant packet inside the box, then feed the filament end through the printer's guide tube; forgetting to reseal the bag between prints lets humidity degrade the material.

When should I replace a partially used spool of this PLA+?

Swap the spool when the remaining filament shows brittleness, inconsistent diameter beyond the +/- .03 mm tolerance, or causes frequent nozzle clogs at the recommended 190-200 °C range.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。