Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
13.3 inch FHD touch LCD panel, slim antiglare finish

RAYPODO

RAYPODO AUO B133HAK02.2 13.3" FHD Touch LCD Panel laptop replacement part

SKU CH-0BTR-MRK91

13.3-inch FHD touch panel with AHVA viewing angles, 166 PPI, antiglare coating and 15K-hour WLED backlight for laptop repair

  • Color16.7M, 72% NTSC

model AUO B133HAK02.2

  • Sharp 1920×1080 FHD visuals at 166 PPI
  • Wide 85° viewing angles with AHVA technology
  • Responsive On-Cell touch via USB interface
  • Long-life WLED backlight rated 15K hours
  • Slim 3 mm antiglare hard-coating for durability

Compatible 13.3″ FHD touch panel

This AUO B133HAK02.2 panel is a new replacement part for 13.3-inch laptops requiring a 1920×1080 eDP 1.2 display with On-Cell touch via USB. It suits repair technicians and owners fixing cracked screens, dead pixels or flickering panels. The 3.3 V supply and 30-pin connector match the original specification for direct swap installation.

Fits eDP 1.2 laptops needing touch

Buyers whose laptop uses a different video interface, a non-touch panel or a 30-pin layout that does not match this pinout should look elsewhere. It is not suitable for devices requiring a higher contrast ratio than 700:1 or a colour gamut beyond 72% NTSC. The 3 mm thickness also excludes chassis designed for thicker modules.

On-Cell touch and antiglare coating

The integrated On-Cell layer adds touch control without a separate digitiser, reducing stack height and keeping the 3 mm profile. An antiglare hard coating rated 3H resists surface scratches during daily use. The WLED backlight rated for 15K hours and the built-in LED driver maintain consistent brightness over the panel life.

Ciri-ciri utama

  • Sharp 1920×1080 FHD visuals at 166 PPI
  • Wide 85° viewing angles with AHVA technology
  • Responsive On-Cell touch via USB interface
  • Long-life WLED backlight rated 15K hours
  • Slim 3 mm antiglare hard-coating for durability

Spesifikasi

BrandAUO
ModelB133HAK02.2
Color16.7M, 72% NTSC

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Will the eDP 1.2 connector and 3.3 V supply match my existing laptop cable and motherboard?

The panel uses a standard eDP 1.2 interface and requires a 3.3 V input, matching the specification listed for this AUO B133HAK02.2 replacement screen.

Does the 13.3 inch 1920×1080 resolution and 166 PPI scaling work with the integrated graphics in older laptops?

The 1920×1080 FHD resolution at 166 PPI is driven over the eDP 1.2 link, which integrated graphics supporting that standard can drive without extra hardware.

How can I confirm the On-Cell touch layer and AHVA panel are functioning correctly after installation?

Verify touch response across the 13.3 inch surface, check for 85° viewing angles with consistent colour, and confirm the 700:1 contrast ratio appears uniform on a test pattern.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.