Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
13.3 inch FHD touch LCD panel, slim antiglare finish

RAYPODO

RAYPODO AUO B133HAK02.2 13.3" FHD Touch LCD Panel laptop replacement part

SKU CH-0BTR-MRK91

13.3-inch FHD touch panel with AHVA viewing angles, 166 PPI, antiglare coating and 15K-hour WLED backlight for laptop repair

  • Color16.7M, 72% NTSC

model AUO B133HAK02.2

  • Sharp 1920×1080 FHD visuals at 166 PPI
  • Wide 85° viewing angles with AHVA technology
  • Responsive On-Cell touch via USB interface
  • Long-life WLED backlight rated 15K hours
  • Slim 3 mm antiglare hard-coating for durability

Compatible 13.3″ FHD touch panel

This AUO B133HAK02.2 panel is a new replacement part for 13.3-inch laptops requiring a 1920×1080 eDP 1.2 display with On-Cell touch via USB. It suits repair technicians and owners fixing cracked screens, dead pixels or flickering panels. The 3.3 V supply and 30-pin connector match the original specification for direct swap installation.

Fits eDP 1.2 laptops needing touch

Buyers whose laptop uses a different video interface, a non-touch panel or a 30-pin layout that does not match this pinout should look elsewhere. It is not suitable for devices requiring a higher contrast ratio than 700:1 or a colour gamut beyond 72% NTSC. The 3 mm thickness also excludes chassis designed for thicker modules.

On-Cell touch and antiglare coating

The integrated On-Cell layer adds touch control without a separate digitiser, reducing stack height and keeping the 3 mm profile. An antiglare hard coating rated 3H resists surface scratches during daily use. The WLED backlight rated for 15K hours and the built-in LED driver maintain consistent brightness over the panel life.

Puntos fuertes

  • Sharp 1920×1080 FHD visuals at 166 PPI
  • Wide 85° viewing angles with AHVA technology
  • Responsive On-Cell touch via USB interface
  • Long-life WLED backlight rated 15K hours
  • Slim 3 mm antiglare hard-coating for durability

Especificaciones

BrandAUO
ModelB133HAK02.2
Color16.7M, 72% NTSC

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will the eDP 1.2 connector and 3.3 V supply match my existing laptop cable and motherboard?

The panel uses a standard eDP 1.2 interface and requires a 3.3 V input, matching the specification listed for this AUO B133HAK02.2 replacement screen.

Does the 13.3 inch 1920×1080 resolution and 166 PPI scaling work with the integrated graphics in older laptops?

The 1920×1080 FHD resolution at 166 PPI is driven over the eDP 1.2 link, which integrated graphics supporting that standard can drive without extra hardware.

How can I confirm the On-Cell touch layer and AHVA panel are functioning correctly after installation?

Verify touch response across the 13.3 inch surface, check for 85° viewing angles with consistent colour, and confirm the 700:1 contrast ratio appears uniform on a test pattern.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.