Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
13.3 inch FHD touch LCD panel, slim antiglare finish

RAYPODO

RAYPODO AUO B133HAK02.2 13.3" FHD Touch LCD Panel laptop replacement part

SKU CH-0BTR-MRK91

13.3-inch FHD touch panel with AHVA viewing angles, 166 PPI, antiglare coating and 15K-hour WLED backlight for laptop repair

  • Color16.7M, 72% NTSC

model AUO B133HAK02.2

  • Sharp 1920×1080 FHD visuals at 166 PPI
  • Wide 85° viewing angles with AHVA technology
  • Responsive On-Cell touch via USB interface
  • Long-life WLED backlight rated 15K hours
  • Slim 3 mm antiglare hard-coating for durability

Compatible 13.3″ FHD touch panel

This AUO B133HAK02.2 panel is a new replacement part for 13.3-inch laptops requiring a 1920×1080 eDP 1.2 display with On-Cell touch via USB. It suits repair technicians and owners fixing cracked screens, dead pixels or flickering panels. The 3.3 V supply and 30-pin connector match the original specification for direct swap installation.

Fits eDP 1.2 laptops needing touch

Buyers whose laptop uses a different video interface, a non-touch panel or a 30-pin layout that does not match this pinout should look elsewhere. It is not suitable for devices requiring a higher contrast ratio than 700:1 or a colour gamut beyond 72% NTSC. The 3 mm thickness also excludes chassis designed for thicker modules.

On-Cell touch and antiglare coating

The integrated On-Cell layer adds touch control without a separate digitiser, reducing stack height and keeping the 3 mm profile. An antiglare hard coating rated 3H resists surface scratches during daily use. The WLED backlight rated for 15K hours and the built-in LED driver maintain consistent brightness over the panel life.

Høydepunkter

  • Sharp 1920×1080 FHD visuals at 166 PPI
  • Wide 85° viewing angles with AHVA technology
  • Responsive On-Cell touch via USB interface
  • Long-life WLED backlight rated 15K hours
  • Slim 3 mm antiglare hard-coating for durability

Spesifikasjoner

BrandAUO
ModelB133HAK02.2
Color16.7M, 72% NTSC

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will the eDP 1.2 connector and 3.3 V supply match my existing laptop cable and motherboard?

The panel uses a standard eDP 1.2 interface and requires a 3.3 V input, matching the specification listed for this AUO B133HAK02.2 replacement screen.

Does the 13.3 inch 1920×1080 resolution and 166 PPI scaling work with the integrated graphics in older laptops?

The 1920×1080 FHD resolution at 166 PPI is driven over the eDP 1.2 link, which integrated graphics supporting that standard can drive without extra hardware.

How can I confirm the On-Cell touch layer and AHVA panel are functioning correctly after installation?

Verify touch response across the 13.3 inch surface, check for 85° viewing angles with consistent colour, and confirm the 700:1 contrast ratio appears uniform on a test pattern.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.