EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.
Streacom
A Mini-ITX aluminium case with 5 internal 3.5" and 12 internal 2.5" bays, using 13mm side panels as passive heatsinks for fanless cooling
The Streacom DB4S is a Mini ITX chassis built for silent media-centre or HTPC builds. Its fanless architecture relies on the aluminium side panels to dissipate heat, so it suits users who prioritise zero acoustic output over high-wattage components.
The 13mm thick extruded aluminium panels act as the primary convection surface, moving heat away from the CPU through copper heat pipes without any fans. Because no active cooling is present, the system runs completely silent, and power draw is limited to the components you install rather than the case itself.
The case accepts Mini ITX motherboards and provides two full-height expansion slots for cards up to 200mm long and 116mm tall. Storage capacity includes five 3.5-inch bays and twelve 2.5-inch bays, while front I/O offers two USB 3.0 ports. No power supply is included, so you must source an appropriate unit separately.
| Brand | Streacom |
|---|---|
| Series | DB4 |
| Model | DB4S |
| Type | Mini ITX Media Center / HTPC Case |
| Color | Silver |
| Case Material | ALUMINUM |
| With Power Supply | No |
| Motherboard Compatibility | Mini ITX |
| Internal 3.5" Drive Bays | 5 |
| Internal 2.5" Drive Bays | 12 |
| Expansion Slots | 2 x Full Height Slots (MAX 200mm Length, 116mm Height**) |
| Front Ports | 2 x USB3.0, Bottom Facing |
| Features | Aluminum, Fanless |
Mount the Mini ITX board on the universal bracket, fit the re-engineered CPU mount with its copper shim, then route the heat-pipes perpendicular through the bracket into the 13 mm side panels; the step builders skip is tightening the shim evenly so the full copper path contacts the IHS.
No moving parts exist inside, so only the thermal interface between CPU shim and heat-pipes may need re-pasting after several years; drive trays and port panels are fixed and require no service.
The 13 mm aluminium side panels act as the sole convection surface, so their finite area and 116 mm slot-height restriction on expansion cards cap the total heat the chassis can dissipate silently.
Juga di rak ini
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Apa yang anda hantar untuk membayar, dan mata wang yang anda guna untuk membaca harga.
Dihantar daripada dompet anda semasa semak keluar
Untuk paparan sahaja — katalog diberi harga dalam USD
Tiada mata wang yang sepadan.
Pilih bahasa yang digunakan oleh laman web ini.
No language matches that.
Pengguna baharu?
Sudah mempunyai akaun?
Tiada set semula automatik: kedai ini tidak menghantar sebarang e-mel, jadi tiada pautan sekali guna untuk diminta. Biarkan alamat pada akaun tersebut, ia akan diuruskan secara manual.
Permintaan direkodkan
Tiada apa-apa akan sampai ke peti masuk anda — kedai ini tidak menghantar sebarang e-mel. Seseorang akan menguruskannya secara manual.
Sudah teringat?