OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Streacom
A Mini-ITX aluminium case with 5 internal 3.5" and 12 internal 2.5" bays, using 13mm side panels as passive heatsinks for fanless cooling
The Streacom DB4S is a Mini ITX chassis built for silent media-centre or HTPC builds. Its fanless architecture relies on the aluminium side panels to dissipate heat, so it suits users who prioritise zero acoustic output over high-wattage components.
The 13mm thick extruded aluminium panels act as the primary convection surface, moving heat away from the CPU through copper heat pipes without any fans. Because no active cooling is present, the system runs completely silent, and power draw is limited to the components you install rather than the case itself.
The case accepts Mini ITX motherboards and provides two full-height expansion slots for cards up to 200mm long and 116mm tall. Storage capacity includes five 3.5-inch bays and twelve 2.5-inch bays, while front I/O offers two USB 3.0 ports. No power supply is included, so you must source an appropriate unit separately.
| Brand | Streacom |
|---|---|
| Series | DB4 |
| Model | DB4S |
| Type | Mini ITX Media Center / HTPC Case |
| Color | Silver |
| Case Material | ALUMINUM |
| With Power Supply | No |
| Motherboard Compatibility | Mini ITX |
| Internal 3.5" Drive Bays | 5 |
| Internal 2.5" Drive Bays | 12 |
| Expansion Slots | 2 x Full Height Slots (MAX 200mm Length, 116mm Height**) |
| Front Ports | 2 x USB3.0, Bottom Facing |
| Features | Aluminum, Fanless |
Mount the Mini ITX board on the universal bracket, fit the re-engineered CPU mount with its copper shim, then route the heat-pipes perpendicular through the bracket into the 13 mm side panels; the step builders skip is tightening the shim evenly so the full copper path contacts the IHS.
No moving parts exist inside, so only the thermal interface between CPU shim and heat-pipes may need re-pasting after several years; drive trays and port panels are fixed and require no service.
The 13 mm aluminium side panels act as the sole convection surface, so their finite area and 116 mm slot-height restriction on expansion cards cap the total heat the chassis can dissipate silently.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟