NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
Streacom
A Mini-ITX aluminium case with 5 internal 3.5" and 12 internal 2.5" bays, using 13mm side panels as passive heatsinks for fanless cooling
The Streacom DB4S is a Mini ITX chassis built for silent media-centre or HTPC builds. Its fanless architecture relies on the aluminium side panels to dissipate heat, so it suits users who prioritise zero acoustic output over high-wattage components.
The 13mm thick extruded aluminium panels act as the primary convection surface, moving heat away from the CPU through copper heat pipes without any fans. Because no active cooling is present, the system runs completely silent, and power draw is limited to the components you install rather than the case itself.
The case accepts Mini ITX motherboards and provides two full-height expansion slots for cards up to 200mm long and 116mm tall. Storage capacity includes five 3.5-inch bays and twelve 2.5-inch bays, while front I/O offers two USB 3.0 ports. No power supply is included, so you must source an appropriate unit separately.
| Brand | Streacom |
|---|---|
| Series | DB4 |
| Model | DB4S |
| Type | Mini ITX Media Center / HTPC Case |
| Color | Silver |
| Case Material | ALUMINUM |
| With Power Supply | No |
| Motherboard Compatibility | Mini ITX |
| Internal 3.5" Drive Bays | 5 |
| Internal 2.5" Drive Bays | 12 |
| Expansion Slots | 2 x Full Height Slots (MAX 200mm Length, 116mm Height**) |
| Front Ports | 2 x USB3.0, Bottom Facing |
| Features | Aluminum, Fanless |
Mount the Mini ITX board on the universal bracket, fit the re-engineered CPU mount with its copper shim, then route the heat-pipes perpendicular through the bracket into the 13 mm side panels; the step builders skip is tightening the shim evenly so the full copper path contacts the IHS.
No moving parts exist inside, so only the thermal interface between CPU shim and heat-pipes may need re-pasting after several years; drive trays and port panels are fixed and require no service.
The 13 mm aluminium side panels act as the sole convection surface, so their finite area and 116 mm slot-height restriction on expansion cards cap the total heat the chassis can dissipate silently.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?