Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Small black square blower fan 60x60x15mm with maglev bearing and three-pin connector

SunnyStar Co., Ltd

SunnyStar Co., Ltd GB1206PHV1-AY 60x60x15mm Maglev Blower case fan

SKU CH-N2EH-FP1MQ

A 60×60×15 mm maglev blower fan with a 3-pin connector draws 1.6 W at 12 V for targeted CPU or projector cooling

  • TypeBlower
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction and noise
  • Blower design directs airflow through tight CPU cooler fins
  • 12 V 1.6 W power draw keeps energy use low
  • 60 mm square 15 mm thin frame fits compact projector builds
  • Three-pin connector enables basic speed monitoring

SunnyStar GB1206PHV1-AY 60mm Blower Fan

This 60 by 60 by 15 millimetre blower moves air across a CPU cooler or projector module. It runs on 12 volts and draws 1.6 watts through a three-pin connector. Maglev bearing technology reduces friction for quieter operation.

Suits tight builds needing focused airflow.

The blower design directs a concentrated stream through heatsink fins, making it a match for compact CPU coolers or projector housings. Builds that rely on wide, undirected case airflow should choose a conventional axial fan instead.

Maglev bearing on a 3-pin 12V blower

The magnetic levitation bearing cuts mechanical wear and noise while the three-pin header provides simple voltage control. This combination decides whether the fan fits your cooler’s mounting and your motherboard’s fan header.

Ciri-ciri utama

  • Maglev bearing reduces friction and noise
  • Blower design directs airflow through tight CPU cooler fins
  • 12 V 1.6 W power draw keeps energy use low
  • 60 mm square 15 mm thin frame fits compact projector builds
  • Three-pin connector enables basic speed monitoring

Spesifikasi

SeriesGB1206PHV1-AY
ModelGB1206PHV1-AY
TypeBlower
CompatibilityCPU Cooler
Bearing TypeMaglev
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Blower
Dimensions60*60*15mm

Soalan tentang produk ini

Which version of the GB1206PHV1-AY blower should I pick for a 12 V CPU cooler slot?

The single listed model runs on 12 V, draws 1.6 W and uses a 3-pin connector, so it fits any 12 V 3-pin header.

What does the 1.6 W power draw mean once the fan is installed?

It indicates the maximum electrical load on the motherboard header; actual speed and airflow will vary with the PWM or voltage curve you set.

How does the 3-pin interface limit control in practice?

A 3-pin connection allows voltage-based speed regulation but not 4-pin PWM, so the motherboard adjusts speed by changing the supply voltage.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.