Tripp Lite
Tripp Lite PDUMNH15 Monitored 1U PDU 120V 15A 8x 5-15R
- Monitored
- 1U
328,99 USD
0.00419705BTC
På lager
SunnyStar Co., Ltd
SunnyStar Co., Ltd GB1206PHV1-AY 60x60x15mm Maglev Blower case fan
A 60×60×15 mm maglev blower fan with a 3-pin connector draws 1.6 W at 12 V for targeted CPU or projector cooling
- TypeBlower
- CompatibilityCPU Cooler
- Bearing TypeMaglev
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Maglev bearing reduces friction and noise
- Blower design directs airflow through tight CPU cooler fins
- 12 V 1.6 W power draw keeps energy use low
- 60 mm square 15 mm thin frame fits compact projector builds
- Three-pin connector enables basic speed monitoring
SunnyStar GB1206PHV1-AY 60mm Blower Fan
This 60 by 60 by 15 millimetre blower moves air across a CPU cooler or projector module. It runs on 12 volts and draws 1.6 watts through a three-pin connector. Maglev bearing technology reduces friction for quieter operation.
Suits tight builds needing focused airflow.
The blower design directs a concentrated stream through heatsink fins, making it a match for compact CPU coolers or projector housings. Builds that rely on wide, undirected case airflow should choose a conventional axial fan instead.
Maglev bearing on a 3-pin 12V blower
The magnetic levitation bearing cuts mechanical wear and noise while the three-pin header provides simple voltage control. This combination decides whether the fan fits your cooler’s mounting and your motherboard’s fan header.
Høydepunkter
- Maglev bearing reduces friction and noise
- Blower design directs airflow through tight CPU cooler fins
- 12 V 1.6 W power draw keeps energy use low
- 60 mm square 15 mm thin frame fits compact projector builds
- Three-pin connector enables basic speed monitoring
Spesifikasjoner
| Series | GB1206PHV1-AY |
|---|---|
| Model | GB1206PHV1-AY |
| Type | Blower |
| Compatibility | CPU Cooler |
| Bearing Type | Maglev |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC Blower |
| Dimensions | 60*60*15mm |
Spørsmål om denne varen
Which version of the GB1206PHV1-AY blower should I pick for a 12 V CPU cooler slot?
The single listed model runs on 12 V, draws 1.6 W and uses a 3-pin connector, so it fits any 12 V 3-pin header.
What does the 1.6 W power draw mean once the fan is installed?
It indicates the maximum electrical load on the motherboard header; actual speed and airflow will vary with the PWM or voltage curve you set.
How does the 3-pin interface limit control in practice?
A 3-pin connection allows voltage-based speed regulation but not 4-pin PWM, so the motherboard adjusts speed by changing the supply voltage.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
