暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black square blower fan 60x60x15mm with maglev bearing and three-pin connector

SunnyStar Co., Ltd

SunnyStar Co., Ltd GB1206PHV1-AY 60x60x15mm Maglev Blower case fan

SKU CH-N2EH-FP1MQ

A 60×60×15 mm maglev blower fan with a 3-pin connector draws 1.6 W at 12 V for targeted CPU or projector cooling

  • TypeBlower
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction and noise
  • Blower design directs airflow through tight CPU cooler fins
  • 12 V 1.6 W power draw keeps energy use low
  • 60 mm square 15 mm thin frame fits compact projector builds
  • Three-pin connector enables basic speed monitoring

SunnyStar GB1206PHV1-AY 60mm Blower Fan

This 60 by 60 by 15 millimetre blower moves air across a CPU cooler or projector module. It runs on 12 volts and draws 1.6 watts through a three-pin connector. Maglev bearing technology reduces friction for quieter operation.

Suits tight builds needing focused airflow.

The blower design directs a concentrated stream through heatsink fins, making it a match for compact CPU coolers or projector housings. Builds that rely on wide, undirected case airflow should choose a conventional axial fan instead.

Maglev bearing on a 3-pin 12V blower

The magnetic levitation bearing cuts mechanical wear and noise while the three-pin header provides simple voltage control. This combination decides whether the fan fits your cooler’s mounting and your motherboard’s fan header.

特長

  • Maglev bearing reduces friction and noise
  • Blower design directs airflow through tight CPU cooler fins
  • 12 V 1.6 W power draw keeps energy use low
  • 60 mm square 15 mm thin frame fits compact projector builds
  • Three-pin connector enables basic speed monitoring

仕様

SeriesGB1206PHV1-AY
ModelGB1206PHV1-AY
TypeBlower
CompatibilityCPU Cooler
Bearing TypeMaglev
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Blower
Dimensions60*60*15mm

この商品に関する質問

Which version of the GB1206PHV1-AY blower should I pick for a 12 V CPU cooler slot?

The single listed model runs on 12 V, draws 1.6 W and uses a 3-pin connector, so it fits any 12 V 3-pin header.

What does the 1.6 W power draw mean once the fan is installed?

It indicates the maximum electrical load on the motherboard header; actual speed and airflow will vary with the PWM or voltage curve you set.

How does the 3-pin interface limit control in practice?

A 3-pin connection allows voltage-based speed regulation but not 4-pin PWM, so the motherboard adjusts speed by changing the supply voltage.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。