Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black 2.85 mm filament spool with glossy finish

Taulman 3D

Taulman 3D N-vent Filament 2.85mm 1lb Black 3d printers accessory

SKU CH-XBV0-ZKRSH

Low-odor, styrene-free filament prints at 250–255 °C in 2.85 mm diameter

  • ColorBlack
  • TypeFilament
  • Low-odor, styrene-free printing for a safer workspace
  • Clear, glossy finish enhances part appearance
  • Easy processing reduces print failures and setup time
  • Printed parts retain mechanical properties in end-use applications
  • Prints at 250–255 °C with 2.85 mm diameter filament

Taulman N-vent 2.85 mm Filament

This Taulman 3D N-vent spool supplies 1 lb of black filament at 2.85 mm diameter. The Eastman Amphora polymer prints at 250 to 255 °C and is formulated for low-odour, styrene-free operation. Makers gain clarity, gloss and property retention in finished parts.

Suited for printers accepting 2.85 mm stock

Users whose hardware requires a different filament diameter will need a separate material. The spool addresses hobbyists and professionals who want durable, attractive prints without strong fumes during printing.

Critical spec: 2.85 mm diameter

Only printers equipped for 2.85 mm filament can use this spool; the diameter is the single parameter that determines fit. Verify your extruder specification before purchasing.

Ciri-ciri utama

  • Low-odor, styrene-free printing for a safer workspace
  • Clear, glossy finish enhances part appearance
  • Easy processing reduces print failures and setup time
  • Printed parts retain mechanical properties in end-use applications
  • Prints at 250–255 °C with 2.85 mm diameter filament

Spesifikasi

Brandtaulman3d
ColorBlack
TypeFilament

Soalan tentang produk ini

What nozzle temperature range does the 2.85 mm N-vent filament require?

Print between 250 and 255 degrees Celsius for reliable extrusion and layer adhesion.

Will the 2.85 mm diameter spool fit my printer's filament holder and guide tube?

The filament measures 2.85 mm across, so it fits printers designed for 3 mm-class spools and matching Bowden tubes.

How do I load the filament without grinding or jamming the extruder?

Preheat the hotend to 250–255 °C, then feed the filament steadily until it flows cleanly; forcing it cold is the common mistake.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.