We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2.85 mm filament spool with glossy finish

Taulman 3D

Taulman 3D N-vent Filament 2.85mm 1lb Black 3d printers accessory

SKU CH-XBV0-ZKRSH

Low-odor, styrene-free filament prints at 250–255 °C in 2.85 mm diameter

  • ColorBlack
  • TypeFilament
  • Low-odor, styrene-free printing for a safer workspace
  • Clear, glossy finish enhances part appearance
  • Easy processing reduces print failures and setup time
  • Printed parts retain mechanical properties in end-use applications
  • Prints at 250–255 °C with 2.85 mm diameter filament

Taulman N-vent 2.85 mm Filament

This Taulman 3D N-vent spool supplies 1 lb of black filament at 2.85 mm diameter. The Eastman Amphora polymer prints at 250 to 255 °C and is formulated for low-odour, styrene-free operation. Makers gain clarity, gloss and property retention in finished parts.

Suited for printers accepting 2.85 mm stock

Users whose hardware requires a different filament diameter will need a separate material. The spool addresses hobbyists and professionals who want durable, attractive prints without strong fumes during printing.

Critical spec: 2.85 mm diameter

Only printers equipped for 2.85 mm filament can use this spool; the diameter is the single parameter that determines fit. Verify your extruder specification before purchasing.

Highlights

  • Low-odor, styrene-free printing for a safer workspace
  • Clear, glossy finish enhances part appearance
  • Easy processing reduces print failures and setup time
  • Printed parts retain mechanical properties in end-use applications
  • Prints at 250–255 °C with 2.85 mm diameter filament

Specifications

Brandtaulman3d
ColorBlack
TypeFilament

Questions about this item

What nozzle temperature range does the 2.85 mm N-vent filament require?

Print between 250 and 255 degrees Celsius for reliable extrusion and layer adhesion.

Will the 2.85 mm diameter spool fit my printer's filament holder and guide tube?

The filament measures 2.85 mm across, so it fits printers designed for 3 mm-class spools and matching Bowden tubes.

How do I load the filament without grinding or jamming the extruder?

Preheat the hotend to 250–255 °C, then feed the filament steadily until it flows cleanly; forcing it cold is the common mistake.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.