Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 2.85 mm filament spool with glossy finish

Taulman 3D

Taulman 3D N-vent Filament 2.85mm 1lb Black 3d printers accessory

SKU CH-XBV0-ZKRSH

Low-odor, styrene-free filament prints at 250–255 °C in 2.85 mm diameter

  • ColorBlack
  • TypeFilament
  • Low-odor, styrene-free printing for a safer workspace
  • Clear, glossy finish enhances part appearance
  • Easy processing reduces print failures and setup time
  • Printed parts retain mechanical properties in end-use applications
  • Prints at 250–255 °C with 2.85 mm diameter filament

Taulman N-vent 2.85 mm Filament

This Taulman 3D N-vent spool supplies 1 lb of black filament at 2.85 mm diameter. The Eastman Amphora polymer prints at 250 to 255 °C and is formulated for low-odour, styrene-free operation. Makers gain clarity, gloss and property retention in finished parts.

Suited for printers accepting 2.85 mm stock

Users whose hardware requires a different filament diameter will need a separate material. The spool addresses hobbyists and professionals who want durable, attractive prints without strong fumes during printing.

Critical spec: 2.85 mm diameter

Only printers equipped for 2.85 mm filament can use this spool; the diameter is the single parameter that determines fit. Verify your extruder specification before purchasing.

Pluspunten

  • Low-odor, styrene-free printing for a safer workspace
  • Clear, glossy finish enhances part appearance
  • Easy processing reduces print failures and setup time
  • Printed parts retain mechanical properties in end-use applications
  • Prints at 250–255 °C with 2.85 mm diameter filament

Specificaties

Brandtaulman3d
ColorBlack
TypeFilament

Vragen over dit artikel

What nozzle temperature range does the 2.85 mm N-vent filament require?

Print between 250 and 255 degrees Celsius for reliable extrusion and layer adhesion.

Will the 2.85 mm diameter spool fit my printer's filament holder and guide tube?

The filament measures 2.85 mm across, so it fits printers designed for 3 mm-class spools and matching Bowden tubes.

How do I load the filament without grinding or jamming the extruder?

Preheat the hotend to 250–255 °C, then feed the filament steadily until it flows cleanly; forcing it cold is the common mistake.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.