Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green 3D printing filament spool 2.85mm diameter

Taulman 3D

Taulman 3D N-vent Filament 2.85mm 1lb Green 3d printers accessory

SKU CH-F8C0-6K7QM

Low-odor, styrene-free filament in green 2.85 mm diameter prints at 250 to 255 °C with clarity, gloss and property retention

  • ColorGreen
  • TypeFilament
  • Low-odor and styrene-free printing improves air quality
  • Clear glossy finish enhances part aesthetics
  • Easy processing at 250 to 255 °C reduces print failures
  • Amphora polymer retains mechanical properties in finished parts
  • 85 mm diameter suits compatible 3D printers

Filament diameter 2.85 mm

This spool supplies 1 lb of green Taulman 3D N-vent filament sized at 2.85 mm diameter. The material is based on Eastman Amphora polymer and prints between 250 and 255 °C. It is intended for owners of fused-deposition printers that accept 2.85 mm feedstock.

Makers wanting low-odour, styrene-free prints

The filament emits little smell and contains no styrene, suiting users who print in shared or poorly ventilated spaces. It also delivers high clarity and gloss for visually demanding parts. Builders who require a different diameter or a higher-temperature engineering polymer should consider other options.

Print temperature 250–255 °C

Your printer’s hot-end must reach and hold 250 to 255 °C reliably; if it cannot, the filament will not extrude correctly. This single thermal requirement determines whether the spool is compatible with your machine.

Ciri-ciri utama

  • Low-odor and styrene-free printing improves air quality
  • Clear glossy finish enhances part aesthetics
  • Easy processing at 250 to 255 °C reduces print failures
  • Amphora polymer retains mechanical properties in finished parts
  • 85 mm diameter suits compatible 3D printers

Spesifikasi

Brandtaulman3d
ColorGreen
TypeFilament

Soalan tentang produk ini

Does the 1 lb spool of N-vent filament need any special storage or drying before printing?

The Eastman Amphora polymer is low-odor and styrene-free, but like most filaments it should be kept dry in a sealed bag with desiccant to prevent moisture absorption that can affect print quality.

What is the maximum nozzle temperature the green 2.85 mm filament can handle during long prints?

The recommended printing range is 250 to 255 °C, so sustained use should stay within that window to avoid degradation.

How much heat and smell does the filament produce when the printer runs all day at 250 °C?

N-vent is formulated to be low-odor and styrene-free, so it emits minimal fumes and the printer’s hot-end operates at the standard 250–255 °C range without excessive heat buildup.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.