Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green 3D printing filament spool 2.85mm diameter

Taulman 3D

Taulman 3D N-vent Filament 2.85mm 1lb Green 3d printers accessory

SKU CH-F8C0-6K7QM

Low-odor, styrene-free filament in green 2.85 mm diameter prints at 250 to 255 °C with clarity, gloss and property retention

  • ColorGreen
  • TypeFilament
  • Low-odor and styrene-free printing improves air quality
  • Clear glossy finish enhances part aesthetics
  • Easy processing at 250 to 255 °C reduces print failures
  • Amphora polymer retains mechanical properties in finished parts
  • 85 mm diameter suits compatible 3D printers

Filament diameter 2.85 mm

This spool supplies 1 lb of green Taulman 3D N-vent filament sized at 2.85 mm diameter. The material is based on Eastman Amphora polymer and prints between 250 and 255 °C. It is intended for owners of fused-deposition printers that accept 2.85 mm feedstock.

Makers wanting low-odour, styrene-free prints

The filament emits little smell and contains no styrene, suiting users who print in shared or poorly ventilated spaces. It also delivers high clarity and gloss for visually demanding parts. Builders who require a different diameter or a higher-temperature engineering polymer should consider other options.

Print temperature 250–255 °C

Your printer’s hot-end must reach and hold 250 to 255 °C reliably; if it cannot, the filament will not extrude correctly. This single thermal requirement determines whether the spool is compatible with your machine.

Fordele

  • Low-odor and styrene-free printing improves air quality
  • Clear glossy finish enhances part aesthetics
  • Easy processing at 250 to 255 °C reduces print failures
  • Amphora polymer retains mechanical properties in finished parts
  • 85 mm diameter suits compatible 3D printers

Specifikationer

Brandtaulman3d
ColorGreen
TypeFilament

Spørgsmål om denne vare

Does the 1 lb spool of N-vent filament need any special storage or drying before printing?

The Eastman Amphora polymer is low-odor and styrene-free, but like most filaments it should be kept dry in a sealed bag with desiccant to prevent moisture absorption that can affect print quality.

What is the maximum nozzle temperature the green 2.85 mm filament can handle during long prints?

The recommended printing range is 250 to 255 °C, so sustained use should stay within that window to avoid degradation.

How much heat and smell does the filament produce when the printer runs all day at 250 °C?

N-vent is formulated to be low-odor and styrene-free, so it emits minimal fumes and the printer’s hot-end operates at the standard 250–255 °C range without excessive heat buildup.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.