Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 3D printing filament spool 2.85mm diameter

Taulman 3D

Taulman 3D N-vent Filament 2.85mm 1lb Green 3d printers accessory

SKU CH-F8C0-6K7QM

Low-odor, styrene-free filament in green 2.85 mm diameter prints at 250 to 255 °C with clarity, gloss and property retention

  • ColorGreen
  • TypeFilament
  • Low-odor and styrene-free printing improves air quality
  • Clear glossy finish enhances part aesthetics
  • Easy processing at 250 to 255 °C reduces print failures
  • Amphora polymer retains mechanical properties in finished parts
  • 85 mm diameter suits compatible 3D printers

Filament diameter 2.85 mm

This spool supplies 1 lb of green Taulman 3D N-vent filament sized at 2.85 mm diameter. The material is based on Eastman Amphora polymer and prints between 250 and 255 °C. It is intended for owners of fused-deposition printers that accept 2.85 mm feedstock.

Makers wanting low-odour, styrene-free prints

The filament emits little smell and contains no styrene, suiting users who print in shared or poorly ventilated spaces. It also delivers high clarity and gloss for visually demanding parts. Builders who require a different diameter or a higher-temperature engineering polymer should consider other options.

Print temperature 250–255 °C

Your printer’s hot-end must reach and hold 250 to 255 °C reliably; if it cannot, the filament will not extrude correctly. This single thermal requirement determines whether the spool is compatible with your machine.

Kohokohdat

  • Low-odor and styrene-free printing improves air quality
  • Clear glossy finish enhances part aesthetics
  • Easy processing at 250 to 255 °C reduces print failures
  • Amphora polymer retains mechanical properties in finished parts
  • 85 mm diameter suits compatible 3D printers

Tekniset tiedot

Brandtaulman3d
ColorGreen
TypeFilament

Kysymyksiä tästä tuotteesta

Does the 1 lb spool of N-vent filament need any special storage or drying before printing?

The Eastman Amphora polymer is low-odor and styrene-free, but like most filaments it should be kept dry in a sealed bag with desiccant to prevent moisture absorption that can affect print quality.

What is the maximum nozzle temperature the green 2.85 mm filament can handle during long prints?

The recommended printing range is 250 to 255 °C, so sustained use should stay within that window to avoid degradation.

How much heat and smell does the filament produce when the printer runs all day at 250 °C?

N-vent is formulated to be low-odor and styrene-free, so it emits minimal fumes and the printer’s hot-end operates at the standard 250–255 °C range without excessive heat buildup.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.