Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black 60mm square case fan with Maglev bearing, 3-pin connector, no LED lighting

Zyvpee

Zyvpee MB60101V3-0000-F99 60mm Maglev case fan

SKU CH-KA7F-74C49

A 60 mm maglev case fan running at 2500-2999 RPM with 20-25 dBA noise and a 3-pin 12 V connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM2500-2999 RPM
  • Noise Level20 - 25 dBA
  • Power Connector3 Pin
  • Maglev bearing keeps noise down to 20-25 dBA
  • 12 V 0.65 W draw limits power use
  • 2500-2999 RPM range suits CPU coolers
  • 60×60×10 mm frame fits tight builds
  • 3-pin connector works with standard headers

60 mm Maglev case fan

The Zyvpee MB60101V3-0000-F99 is a 60 by 10 mm DC 12 V case fan that uses a maglev bearing for quiet operation. It spins between 2500 and 2999 RPM while drawing 0.65 W and connects through a standard three-pin header.

Suits compact CPU coolers and tight chassis

Builders fitting a small-form-factor cooler or a space-constrained chassis will appreciate the low 20 to 25 dBA noise profile. Those who need PWM speed control or addressable lighting should look at a different model because this unit offers neither.

Moves enough air for low-TDP coolers

At the stated speed range the fan delivers adequate airflow for modest thermal loads on compatible CPU coolers. Higher-wattage processors or multi-fan radiators will exceed what this single 60 mm unit can comfortably dissipate.

Ciri-ciri utama

  • Maglev bearing keeps noise down to 20-25 dBA
  • 12 V 0.65 W draw limits power use
  • 2500-2999 RPM range suits CPU coolers
  • 60×60×10 mm frame fits tight builds
  • 3-pin connector works with standard headers

Spesifikasi

SeriesMB60101V3-0000-F99
ModelMB60101V3-0000-F99
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM2500-2999 RPM
Noise Level20 - 25 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*10mm

Soalan tentang produk ini

Does my motherboard need a 3-pin header to run this 12 V 0.65 W maglev fan?

Yes — the fan uses a 3-pin DC connector and requires a 12 V header on the board or controller.

Will the 60 mm frame and 2500-2999 RPM range fit the mounting holes on my existing CPU cooler?

The fan measures 60×60×10 mm; check your cooler’s hole spacing against those dimensions before installing.

How can I confirm the fan is spinning at the rated speed after I connect it?

Read the RPM in BIOS or monitoring software — it should report between 2500 and 2999 RPM under load.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.