Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 60mm square case fan with Maglev bearing, 3-pin connector, no LED lighting

Zyvpee

Zyvpee MB60101V3-0000-F99 60mm Maglev case fan

SKU CH-KA7F-74C49

A 60 mm maglev case fan running at 2500-2999 RPM with 20-25 dBA noise and a 3-pin 12 V connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM2500-2999 RPM
  • Noise Level20 - 25 dBA
  • Power Connector3 Pin
  • Maglev bearing keeps noise down to 20-25 dBA
  • 12 V 0.65 W draw limits power use
  • 2500-2999 RPM range suits CPU coolers
  • 60×60×10 mm frame fits tight builds
  • 3-pin connector works with standard headers

60 mm Maglev case fan

The Zyvpee MB60101V3-0000-F99 is a 60 by 10 mm DC 12 V case fan that uses a maglev bearing for quiet operation. It spins between 2500 and 2999 RPM while drawing 0.65 W and connects through a standard three-pin header.

Suits compact CPU coolers and tight chassis

Builders fitting a small-form-factor cooler or a space-constrained chassis will appreciate the low 20 to 25 dBA noise profile. Those who need PWM speed control or addressable lighting should look at a different model because this unit offers neither.

Moves enough air for low-TDP coolers

At the stated speed range the fan delivers adequate airflow for modest thermal loads on compatible CPU coolers. Higher-wattage processors or multi-fan radiators will exceed what this single 60 mm unit can comfortably dissipate.

Puncte forte

  • Maglev bearing keeps noise down to 20-25 dBA
  • 12 V 0.65 W draw limits power use
  • 2500-2999 RPM range suits CPU coolers
  • 60×60×10 mm frame fits tight builds
  • 3-pin connector works with standard headers

Specificații

SeriesMB60101V3-0000-F99
ModelMB60101V3-0000-F99
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM2500-2999 RPM
Noise Level20 - 25 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*10mm

Întrebări despre acest articol

Does my motherboard need a 3-pin header to run this 12 V 0.65 W maglev fan?

Yes — the fan uses a 3-pin DC connector and requires a 12 V header on the board or controller.

Will the 60 mm frame and 2500-2999 RPM range fit the mounting holes on my existing CPU cooler?

The fan measures 60×60×10 mm; check your cooler’s hole spacing against those dimensions before installing.

How can I confirm the fan is spinning at the rated speed after I connect it?

Read the RPM in BIOS or monitoring software — it should report between 2500 and 2999 RPM under load.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.