Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black 60mm square case fan with Maglev bearing, 3-pin connector, no LED lighting

Zyvpee

Zyvpee MB60101V3-0000-F99 60mm Maglev case fan

SKU CH-KA7F-74C49

A 60 mm maglev case fan running at 2500-2999 RPM with 20-25 dBA noise and a 3-pin 12 V connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM2500-2999 RPM
  • Noise Level20 - 25 dBA
  • Power Connector3 Pin
  • Maglev bearing keeps noise down to 20-25 dBA
  • 12 V 0.65 W draw limits power use
  • 2500-2999 RPM range suits CPU coolers
  • 60×60×10 mm frame fits tight builds
  • 3-pin connector works with standard headers

60 mm Maglev case fan

The Zyvpee MB60101V3-0000-F99 is a 60 by 10 mm DC 12 V case fan that uses a maglev bearing for quiet operation. It spins between 2500 and 2999 RPM while drawing 0.65 W and connects through a standard three-pin header.

Suits compact CPU coolers and tight chassis

Builders fitting a small-form-factor cooler or a space-constrained chassis will appreciate the low 20 to 25 dBA noise profile. Those who need PWM speed control or addressable lighting should look at a different model because this unit offers neither.

Moves enough air for low-TDP coolers

At the stated speed range the fan delivers adequate airflow for modest thermal loads on compatible CPU coolers. Higher-wattage processors or multi-fan radiators will exceed what this single 60 mm unit can comfortably dissipate.

Pontos fortes

  • Maglev bearing keeps noise down to 20-25 dBA
  • 12 V 0.65 W draw limits power use
  • 2500-2999 RPM range suits CPU coolers
  • 60×60×10 mm frame fits tight builds
  • 3-pin connector works with standard headers

Especificações

SeriesMB60101V3-0000-F99
ModelMB60101V3-0000-F99
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM2500-2999 RPM
Noise Level20 - 25 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*10mm

Perguntas sobre este artigo

Does my motherboard need a 3-pin header to run this 12 V 0.65 W maglev fan?

Yes — the fan uses a 3-pin DC connector and requires a 12 V header on the board or controller.

Will the 60 mm frame and 2500-2999 RPM range fit the mounting holes on my existing CPU cooler?

The fan measures 60×60×10 mm; check your cooler’s hole spacing against those dimensions before installing.

How can I confirm the fan is spinning at the rated speed after I connect it?

Read the RPM in BIOS or monitoring software — it should report between 2500 and 2999 RPM under load.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.