Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Four green 240-pin DDR3L ECC registered DIMMs in a quad-channel kit

A-Tech

A-Tech 32GB (4x8GB) DDR3L 1333 ECC RDIMM 2Rx4 1.35V server RAM

SKU CH-3GJ3-SA4QX

A 32 GB quad-channel kit of DDR3L 1333 ECC registered DIMMs for servers and workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (4 x 8GB)

Speed DDR3L 1333 (PC3L 10600)

  • 32 GB quad-channel kit expands server memory capacity for heavier workloads
  • DDR3L 1333 MHz at 1.35 V reduces power draw versus standard DDR3
  • ECC registered design detects and corrects data errors to protect critical applications
  • Dual-rank x4 organisation increases memory density per channel for scalable performance
  • 240-pin DIMM form factor fits DDR3/DDR3L server and workstation slots only

32GB DDR3L ECC RDIMM kit for servers

This 32GB kit contains four 8GB DDR3L 1333 registered DIMMs with ECC. It is built for servers and workstations that require registered, dual-rank x4 modules running at 1.35 volts. The memory is not compatible with standard desktop or laptop computers.

DDR3L 1333 registered interface limits

The modules use the 240-pin DDR3L form factor and operate at PC3L-10600 speed with CL9 latency. Registered buffering and ECC add command-cycle overhead that desktop platforms cannot support, so the kit will only function in systems designed for registered DDR3L memory.

Verify platform support before ordering

Check your system manual to confirm it accepts DDR3L registered ECC DIMMs in a quad-channel configuration. Ensure the motherboard supports 2Rx4 organisation and can run memory at 1.35 volts or 1.5 volts. Desktop boards and consumer laptops will not accept these modules.

Høydepunkter

  • 32 GB quad-channel kit expands server memory capacity for heavier workloads
  • DDR3L 1333 MHz at 1.35 V reduces power draw versus standard DDR3
  • ECC registered design detects and corrects data errors to protect critical applications
  • Dual-rank x4 organisation increases memory density per channel for scalable performance
  • 240-pin DIMM form factor fits DDR3/DDR3L server and workstation slots only

Spesifikasjoner

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3L-10600R
Capacity32GB (4 x 8GB)
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

How should I decide between the 32 GB kit and other capacity options?

This kit provides 32 GB total across four 8 GB modules, giving you a balanced quad-channel population for supported server and workstation boards.

What does the 1333 MHz rating mean for actual throughput in my system?

The modules run at DDR3L 1333 with CL9 timing, delivering the standard PC3L-10600 data rate when installed in a compatible registered DIMM slot.

Does the DDR3L 1.35 V specification limit which platforms can use this memory?

The modules operate at 1.35 V and are also rated for 1.5 V, so they work in any DDR3/DDR3L server or workstation that accepts registered ECC RDIMMs.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.