Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Four green DDR5 DIMM modules without heat spreaders, 288-pin, 64GB kit

A-Tech

A-Tech 64GB (4×16GB) DDR5 5600 CL46 1.1V Desktop RAM

SKU CH-K3QP-ZP7MW

Quad-channel 64 GB kit of four 16 GB DDR5-5600 DIMMs at CL46 and 1.1 V

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • Tested Frequency5600
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Capacity 64GB (4 x 16GB)

Speed DDR5 5600 (PC5 44800)

CAS Latency CL46

  • CL40
  • CL42
  • CL46

Color

Overstrøkne versjoner finnes, men er ikke på lager her.

  • 64 GB total capacity with four 16 GB modules
  • DDR5 5600 speed rated at PC5-44800 for fast data rates
  • CL46 latency tuned for responsive system performance
  • 1 V standard DDR5 voltage keeps power draw low
  • 288-pin DIMM form factor fits compatible desktop motherboards

A 64 GB DDR5 quad-channel kit

This kit delivers 64 GB of DDR5 memory across four 16 GB modules rated at 5600 MT/s with CL46 latency. It runs at the standard 1.1 V DDR5 voltage and uses unbuffered non-ECC DIMMs. The quad-channel layout is intended for desktop platforms that support four-module populations.

Suited for DDR5 desktop builds needing high capacity

The 64 GB total capacity helps with heavy multitasking, content creation and memory-hungry workloads on compatible AMD and Intel systems. Builders using boards limited to two DIMM slots or requiring registered ECC memory should choose a different kit.

Four 288-pin DIMMs for quad-channel platforms

Each module uses the standard 288-pin DDR5 DIMM form factor and draws power at the native 1.1 V level. No heat spreader is fitted, so airflow around the slots handles cooling. The kit leaves other expansion areas free and does not require extra power connectors.

Høydepunkter

  • 64 GB total capacity with four 16 GB modules
  • DDR5 5600 speed rated at PC5-44800 for fast data rates
  • CL46 latency tuned for responsive system performance
  • 1 V standard DDR5 voltage keeps power draw low
  • 288-pin DIMM form factor fits compatible desktop motherboards

Spesifikasjoner

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
Capacity64GB (4 x 16GB)
SpeedDDR5 5600 (PC5 44800)
Tested Frequency5600
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Does my motherboard need four DDR5 DIMM slots to install this 4×16 GB kit?

Yes, the kit contains four 288-pin DDR5 modules, so the board must provide four DDR5 DIMM sockets.

Can I keep my existing DDR5 4800 modules and add this 5600 CL46 kit?

The system will run all modules at the lowest common speed and loosest timings, so the 5600 CL46 sticks will downclock to match 4800.

How do I confirm the kit is running at 5600 MT/s and CL46 after installation?

Check the memory tab in CPU-Z or the BIOS memory information screen; it should show 5600 MT/s and CAS latency 46.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.