A-Tech
A-Tech 8GB DDR3L 1333 ECC UDIMM 2Rx8 1.35V for Micron MT18KSF1G72AZ-1G4 server RAM
8GB DDR3L 1333 ECC UDIMM module with CL9 latency, 1.35V operation and 2Rx8 organisation for Micron MT18KSF1G72AZ-1G4 servers
- Capacity8GB
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredUnbuffered
- 8GB capacity expands server memory for heavier workloads
- DDR3L 1333 speed matches PC3L-10600 spec for drop-in upgrades
- ECC unbuffered design detects and corrects single-bit errors automatically
- 35 V low-voltage operation reduces power draw and heat
- 240-pin UDIMM form factor fits standard DDR3 DIMM slots
A-Tech 8GB DDR3L ECC UDIMM
This 8 GB DDR3L module runs at 1333 MHz with CL9 latency and 1.35 V operation. It is built as an unbuffered ECC UDIMM using a 2Rx8 organisation and major-brand chips. The 240-pin DIMM targets server and workstation systems that require error-correcting memory.
PC3L-10600 2Rx8 unbuffered ECC
The single specification that decides fit is the PC3L-10600 2Rx8 unbuffered ECC profile. Your motherboard must explicitly support DDR3L 1333 ECC UDIMMs with this rank and voltage. Registered or non-ECC modules will not work in its place, nor will standard 1.5 V DDR3 at the same speed.
Straightforward 240-pin installation
Align the notch on the 240-pin DIMM with the slot key, press firmly until the retention clips click, and verify the module seats evenly. The most common issue is inserting a 1.5 V DDR3 stick or a registered DIMM by mistake, which prevents the system from posting. Always confirm the platform supports unbuffered ECC before ordering.
Høydepunkter
- 8GB capacity expands server memory for heavier workloads
- DDR3L 1333 speed matches PC3L-10600 spec for drop-in upgrades
- ECC unbuffered design detects and corrects single-bit errors automatically
- 35 V low-voltage operation reduces power draw and heat
- 240-pin UDIMM form factor fits standard DDR3 DIMM slots
Spesifikasjoner
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Spørsmål om denne varen
What does the 1333MHz DDR3L rating mean for actual throughput in a server?
The module runs at 1333MT/s, giving a peak bandwidth of 10600MB/s per channel.
How does the ECC UDIMM interface limit the memory subsystem?
ECC UDIMM adds single-bit error correction without a register, so the memory controller drives each DIMM directly and the platform must support unbuffered ECC.
Will the 240-pin DIMM fit in my system's memory slots?
It uses the standard 240-pin DDR3 DIMM form factor; the key notch matches DDR3L 1.35V slots and the module height follows the UDIMM profile.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



