BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
8GB DDR3L 1333 ECC UDIMM module with CL9 latency, 1.35V operation and 2Rx8 organisation for Micron MT18KSF1G72AZ-1G4 servers
This 8 GB DDR3L module runs at 1333 MHz with CL9 latency and 1.35 V operation. It is built as an unbuffered ECC UDIMM using a 2Rx8 organisation and major-brand chips. The 240-pin DIMM targets server and workstation systems that require error-correcting memory.
The single specification that decides fit is the PC3L-10600 2Rx8 unbuffered ECC profile. Your motherboard must explicitly support DDR3L 1333 ECC UDIMMs with this rank and voltage. Registered or non-ECC modules will not work in its place, nor will standard 1.5 V DDR3 at the same speed.
Align the notch on the 240-pin DIMM with the slot key, press firmly until the retention clips click, and verify the module seats evenly. The most common issue is inserting a 1.5 V DDR3 stick or a registered DIMM by mistake, which prevents the system from posting. Always confirm the platform supports unbuffered ECC before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 1333MT/s, giving a peak bandwidth of 10600MB/s per channel.
ECC UDIMM adds single-bit error correction without a register, so the memory controller drives each DIMM directly and the platform must support unbuffered ECC.
It uses the standard 240-pin DDR3 DIMM form factor; the key notch matches DDR3L 1.35V slots and the module height follows the UDIMM profile.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?