Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Yellow simplex fibre patch cable with LC male connectors

AddOn

AddOn ADD-LC-LC-2MS9SMF fibre optic cable 0.5 ft LC male simplex yellow

SKU CH-4XQK-SQQPP MPN ADD-LC-LC-2MS9SMF

A 0.5 ft yellow simplex single-mode fibre patch cable with LC male connectors for indoor riser use

  • TypeFiber Optic
  • ColorYellow
  • Length0.5 ft.
  • Connector Number1
  • Connector Detail1 x LC Male Network
  • OS2 single-mode fiber supports 1310 nm and 1550 nm wavelengths
  • 9/125 micron core/cladding delivers low attenuation up to 1 dB/km
  • Simplex LC male connectors suit bi-directional transceivers
  • OFNR riser rating approved for indoor vertical runs
  • ISO/IEC 11801 compliant for structured cabling standards

2-metre LC simplex patch cable

This two-metre yellow simplex patch cable carries single-mode fibre between LC male connectors. It is built for indoor riser installations where a single strand links bi-directional transceivers or other single-transmit devices. The OS2 fibre meets ISO/IEC 11801 and is rated for 1310 nm and 1550 nm wavelengths. The cable is guaranteed by federal law not to void OEM warranties.

Riser-rated indoor construction

The OFNR jacket is rated for vertical runs inside buildings and contains no conductive elements. Attenuation is specified at a maximum of 1 dB per kilometre on the 9/125 micron core. The simplex design keeps the cable thin and flexible for routing through cable management. No power or cooling considerations apply to this passive assembly.

Single-strand simplicity

A single LC male connector at each end means the cable occupies only one port per device and works with bi-directional optics that transmit and receive on one fibre. The yellow jacket identifies the OS2 single-mode standard at a glance. No software, drivers or additional accessories are included or required.

Høydepunkter

  • OS2 single-mode fiber supports 1310 nm and 1550 nm wavelengths
  • 9/125 micron core/cladding delivers low attenuation up to 1 dB/km
  • Simplex LC male connectors suit bi-directional transceivers
  • OFNR riser rating approved for indoor vertical runs
  • ISO/IEC 11801 compliant for structured cabling standards

Spesifikasjoner

BrandAddOn
ModelADD-LC-LC-2MS9SMF
TypeFiber Optic
ColorYellow
Length0.5 ft.
Connector Number1
Connector Detail1 x LC Male Network
Fraktvekt0.07 kg
Pakkestørrelse203 × 197 × 13 mm

Spørsmål om denne varen

How do I install this 0.5 ft LC male simplex cable without damaging the ceramic ferrule?

Align the key on the LC connector with the transceiver slot, push straight in until the latch clicks, and avoid twisting the 9/125 µm fiber during insertion.

What maintenance will this yellow OS2 patch cable need over time?

Inspect the LC end-faces with a fiber scope before each reconnect; clean with a lint-free wipe and isopropyl alcohol if contamination is visible.

What is the first performance limit reached on a long single-mode run at 1310 nm?

Attenuation of 1 dB per kilometre is the limiting factor, so signal loss over distance appears before bandwidth constraints.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.