Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Yellow simplex fibre patch cable with LC male connectors

AddOn

AddOn ADD-LC-LC-2MS9SMF fibre optic cable 0.5 ft LC male simplex yellow

SKU CH-4XQK-SQQPP MPN ADD-LC-LC-2MS9SMF

A 0.5 ft yellow simplex single-mode fibre patch cable with LC male connectors for indoor riser use

  • TypeFiber Optic
  • ColorYellow
  • Length0.5 ft.
  • Connector Number1
  • Connector Detail1 x LC Male Network
  • OS2 single-mode fiber supports 1310 nm and 1550 nm wavelengths
  • 9/125 micron core/cladding delivers low attenuation up to 1 dB/km
  • Simplex LC male connectors suit bi-directional transceivers
  • OFNR riser rating approved for indoor vertical runs
  • ISO/IEC 11801 compliant for structured cabling standards

2-metre LC simplex patch cable

This two-metre yellow simplex patch cable carries single-mode fibre between LC male connectors. It is built for indoor riser installations where a single strand links bi-directional transceivers or other single-transmit devices. The OS2 fibre meets ISO/IEC 11801 and is rated for 1310 nm and 1550 nm wavelengths. The cable is guaranteed by federal law not to void OEM warranties.

Riser-rated indoor construction

The OFNR jacket is rated for vertical runs inside buildings and contains no conductive elements. Attenuation is specified at a maximum of 1 dB per kilometre on the 9/125 micron core. The simplex design keeps the cable thin and flexible for routing through cable management. No power or cooling considerations apply to this passive assembly.

Single-strand simplicity

A single LC male connector at each end means the cable occupies only one port per device and works with bi-directional optics that transmit and receive on one fibre. The yellow jacket identifies the OS2 single-mode standard at a glance. No software, drivers or additional accessories are included or required.

Punti di forza

  • OS2 single-mode fiber supports 1310 nm and 1550 nm wavelengths
  • 9/125 micron core/cladding delivers low attenuation up to 1 dB/km
  • Simplex LC male connectors suit bi-directional transceivers
  • OFNR riser rating approved for indoor vertical runs
  • ISO/IEC 11801 compliant for structured cabling standards

Caratteristiche tecniche

BrandAddOn
ModelADD-LC-LC-2MS9SMF
TypeFiber Optic
ColorYellow
Length0.5 ft.
Connector Number1
Connector Detail1 x LC Male Network
Peso di spedizione0.07 kg
Dimensioni del pacco203 × 197 × 13 mm

Domande su questo articolo

How do I install this 0.5 ft LC male simplex cable without damaging the ceramic ferrule?

Align the key on the LC connector with the transceiver slot, push straight in until the latch clicks, and avoid twisting the 9/125 µm fiber during insertion.

What maintenance will this yellow OS2 patch cable need over time?

Inspect the LC end-faces with a fiber scope before each reconnect; clean with a lint-free wipe and isopropyl alcohol if contamination is visible.

What is the first performance limit reached on a long single-mode run at 1310 nm?

Attenuation of 1 dB per kilometre is the limiting factor, so signal loss over distance appears before bandwidth constraints.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.