Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

ARCTIC

ARCTIC TP-4 Thermal Pad 100x100x0.5mm Stackable 2.0mm

SKU CH-AADW-2G78G

A 100 mm square silicone pad that compresses from 0.5 mm to 0.3 mm and stacks to 2.0 mm for RAM, GPUs, SSDs and consoles

  • Ultra-soft silicone pad delivers high thermal conductivity across uneven chip surfaces
  • Compresses from 0.5 mm to .3 mm cutting thermal resistance by 40%
  • Conforms to gaps and height differences for reliable contact without stressing components
  • Electrically insulating, non-adhesive and vibration-dampening for safe long-term use
  • Stackable up to 2.0 mm thick and easily cut for RAM, GPU, SSD and console cooling

Thermal Pad for Components

The ARCTIC TP-4 is a silicone-based thermal pad measuring 100x100 mm with a 0.5 mm thickness. It suits builders servicing RAM, GPUs, laptops, consoles or M.2 SSDs who need a soft, electrically insulating gap filler that dampens vibration and cuts easily to shape.

Compression Limits and Stacking

Each pad compresses from 0.5 mm down to roughly 0.3 mm, reducing thermal resistance while accommodating height differences up to 40 percent. Multiple pads can be stacked to reach a total height of 2.0 mm, but the material is not adhesive so layers rely on mounting pressure to stay in place.

Check Clearance and Surface Before Buying

Verify that the component and heatsink gap falls within the 0.5 mm to 2.0 mm range after compression. Ensure surfaces are clean and free of old compound, and confirm that the mounting hardware can provide even pressure across the pad without exceeding the stack height limit.

Høydepunkter

  • Ultra-soft silicone pad delivers high thermal conductivity across uneven chip surfaces
  • Compresses from 0.5 mm to .3 mm cutting thermal resistance by 40%
  • Conforms to gaps and height differences for reliable contact without stressing components
  • Electrically insulating, non-adhesive and vibration-dampening for safe long-term use
  • Stackable up to 2.0 mm thick and easily cut for RAM, GPU, SSD and console cooling

Spesifikasjoner

Ingen publiserte spesifikasjoner for denne varen ennå.

Spørsmål om denne varen

Should I use a single 0.5 mm pad or stack several to reach 2.0 mm?

The pads are 0.5 mm thick and designed to be stacked up to 2.0 mm total; choose the stack height that matches the gap you need to fill.

What does the 40 % compression figure mean when the pad is installed?

The material can compress from 0.5 mm to about 0.3 mm, reducing thermal resistance and conforming to uneven surfaces.

Is the pad electrically conductive, and will it short components?

The TP-4 pad is electrically insulating, so it will not cause shorts even if it touches exposed circuitry.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.