Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

ARCTIC

ARCTIC TP-4 Thermal Pad 100x100x0.5mm Stackable 2.0mm

SKU CH-AADW-2G78G

A 100 mm square silicone pad that compresses from 0.5 mm to 0.3 mm and stacks to 2.0 mm for RAM, GPUs, SSDs and consoles

  • Ultra-soft silicone pad delivers high thermal conductivity across uneven chip surfaces
  • Compresses from 0.5 mm to .3 mm cutting thermal resistance by 40%
  • Conforms to gaps and height differences for reliable contact without stressing components
  • Electrically insulating, non-adhesive and vibration-dampening for safe long-term use
  • Stackable up to 2.0 mm thick and easily cut for RAM, GPU, SSD and console cooling

Thermal Pad for Components

The ARCTIC TP-4 is a silicone-based thermal pad measuring 100x100 mm with a 0.5 mm thickness. It suits builders servicing RAM, GPUs, laptops, consoles or M.2 SSDs who need a soft, electrically insulating gap filler that dampens vibration and cuts easily to shape.

Compression Limits and Stacking

Each pad compresses from 0.5 mm down to roughly 0.3 mm, reducing thermal resistance while accommodating height differences up to 40 percent. Multiple pads can be stacked to reach a total height of 2.0 mm, but the material is not adhesive so layers rely on mounting pressure to stay in place.

Check Clearance and Surface Before Buying

Verify that the component and heatsink gap falls within the 0.5 mm to 2.0 mm range after compression. Ensure surfaces are clean and free of old compound, and confirm that the mounting hardware can provide even pressure across the pad without exceeding the stack height limit.

Poudarki

  • Ultra-soft silicone pad delivers high thermal conductivity across uneven chip surfaces
  • Compresses from 0.5 mm to .3 mm cutting thermal resistance by 40%
  • Conforms to gaps and height differences for reliable contact without stressing components
  • Electrically insulating, non-adhesive and vibration-dampening for safe long-term use
  • Stackable up to 2.0 mm thick and easily cut for RAM, GPU, SSD and console cooling

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

Should I use a single 0.5 mm pad or stack several to reach 2.0 mm?

The pads are 0.5 mm thick and designed to be stacked up to 2.0 mm total; choose the stack height that matches the gap you need to fill.

What does the 40 % compression figure mean when the pad is installed?

The material can compress from 0.5 mm to about 0.3 mm, reducing thermal resistance and conforming to uneven surfaces.

Is the pad electrically conductive, and will it short components?

The TP-4 pad is electrically insulating, so it will not cause shorts even if it touches exposed circuitry.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.